Hi!
On a SL6.5 machine we now have two connections to the same switch/vlan. One is 1GbE (eth0) and the other is 10GbE (eth5).
Could I just do a "brctl addif br0 eth5" and then "brctl delif br0 eth0" and it switch to use the 10GbE link?
After this we could change the network-scripts to make it work after reboot.
Will this prevent existing connections from being cut?
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.18a9054c4d34 no eth0
vnet1
br4 8000.00265556f190 no eth4
vnet0
virbr0 8000.5254009398c7 yes virbr0-nic
// Johan Guldmyr
Systems Specialist
CSC - IT Center for Science
http://www.csc.fi