Hi all,
I have a Supermicro box (motherboard X7DW3) with 3ware RAID card
(9690SA-4I). I have 24 drives attached to this raid card, while the
first three drives were exported as SINGLE (JBOD) drives. The /boot and
/root are Linux software raid 1 on these first three drives.
The latest kernel-2.6.18-308.8.2.el5.x86_64 would failed to boot, but
the previous kernel, kernel-2.6.18-308.8.1.el5.x86_64, worked just
fine. I also tested with CentOS kernel-2.6.18-308.8.2.el5.x86_64 and
ended up with the same fate. Does anyone see this problem at all?
I googled around and found only one Russian post with seemingly similar
issue. I didn't find anything in RHEL bugzilla.
Thank you.