Hi all,

I have a Supermicro box (motherboard X7DW3) with 3ware RAID card 
(9690SA-4I).  I have 24 drives attached to this raid card, while the 
first three drives were exported as SINGLE (JBOD) drives.  The /boot and 
/root are Linux software raid 1 on these first three drives.

The latest kernel-2.6.18-308.8.2.el5.x86_64 would failed to boot, but 
the previous kernel, kernel-2.6.18-308.8.1.el5.x86_64, worked just 
fine.  I also tested with CentOS kernel-2.6.18-308.8.2.el5.x86_64 and 
ended up with the same fate. Does anyone see this problem at all?

I googled around and found only one Russian post with seemingly similar 
issue. I didn't find anything in  RHEL bugzilla.

Thank you.