On Tue, 27 Jun 2006 11:15:31 +0200, Jaroslaw Polok <[log in to unmask]>
wrote:

>Paul Casteels wrote:
>> I have installed this RPM during the initial setup but now I want to use
>> the
>> serial port for controlling my UPS (NUT).
>> I have removed it with rpm -e but with dmesg I still see this :
>> Kernel command line: ro root=/dev/VolGroup00/LogVol00 ide=nodma rhgb
>> quiet
>> iommu=memaper=3 swiotlb=65536 console=tty0
>> I have included my /boot/grub.conf but there is no reference to the conso
>> le
>> there. How can I get rid of this kernel option?
>
>Is your /etc/grub.conf still a link to /boot/grub/grub.conf ?
>(or a separate /etc/ file was created by some script/editor ...
>which seems to be common error ...)
>
>I assume that you've edited grub.conf yourself since
>(at least 3.1-3 version) SL_enable_serialconsole does
>not remove grub.conf entries upon de-installation ...
Yes it's still a link and I edited it(added some kernel options but did not
remove anything). It was also changed by updating to 2.6.9-34.0.1
>
>Cheers
>
>Jarek
>
>PS: console=tty0 shall not cause any problems
>     for your serial-connected UPS (this is the default
>     console: first screen on first adapter), but please
>     also check /etc/inittab entries for occurences
>     of ttyS0 there ..
Yes you are right, after disabling
co:12345:respawn:/sbin/agetty ttyS0 9600 vt100-nav
in inittab NUT works just fine, thanks.

Paul
>__
>-------------------------------------------------------
>_ Jaroslaw_Polok ___________________ CERN - IT/FIO/LA _
>_ http://home.cern.ch/~jpolok ___ tel_+41_22_767_1834 _
>_____________________________________ +41_78_792_0795 _