SCIENTIFIC-LINUX-USERS Archives

October 2016

SCIENTIFIC-LINUX-USERS@LISTSERV.FNAL.GOV

Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Yasha Karant <[log in to unmask]>
Reply To:
Yasha Karant <[log in to unmask]>
Date:
Fri, 14 Oct 2016 23:53:52 -0700
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (3200 bytes) , text/html (4 kB)
Hello Davide,

Most USA ISPs (e.g., Sprint, ATT, etc.) provide the dongle/router/... , 
often a device that plugs into a USB port. The unit you suggest states:

One Gigabit Ethernet (RJ-45)

Is this only "gigabit ethernet" or does it have other 802.3 
capabilities?  (I much prefer when the vendor states IEEE 802.3 whatever 
so that one can know to which standards the device is claimed to be 
compliant, rather than a marketing term such as "gigabit ethernet".)  To 
avoid 802.11 sniffing, I want to use a wired (e.g., 802.3) connection to 
a device that accesses an ISP 4G, etc., service.

Essentially all ISPs I have found support a USB adapter that is Mac OS X 
or MS Win usable, but I need to verify Linux use (typically with the 
kernels and related drivers/layers that SL 7 uses).

Regards

Yasha

On 10/14/2016 01:13 AM, Davide Poletto wrote:
> Hello Yasha, shouldn't a ISP (carrier) be "OS agnostic"?
>
> I mean: if I were you I would worry about USB 4G/LTE Dongle OS's 
> compatibility but I would not about ISP (carrier) OS's 
> compatibility...this because (yeah, your YMMV), in general, I would 
> avoid to look for (and, even if found, to consequently use) a USB 
> 4G/LTE Dongle directly connected to my Linux host (AFAIK some Huawei 
> 4G Dongles seem to be globally compatible on Linux, tested on Fedora 
> Workstation), I would *instead* direct my research straight to a 
> 4G/LTE Router that will provide (a) an Ethernet LAN port and, 
> eventually (not necessarily), (b) an embedded WiFi AP.
>
> A lot of headaches will be avoided since a Router is OS agnostic and 
> vice versa.
>
> Have you considered *something similar* to a 4G/LTE Router *like* the 
> ZyXEL LTE4506-M606 
> <http://www.zyxel.com/me/en/products_services/lte4506_m606.shtml?t=p>? 
> Just plug-in your enabled 4G/LTE carrier's SIM and you should be 
> OK...provided that your carrier provides good 4G/LTE signal on your 
> zone of operation (especially indoor)...it's better than a USB 4G/LTE 
> Dongle IMHO and it's portable too.
>
> I personally use a ZyXEL LTE3301-Q222 (Indoor 4G/LTE Router) in front 
> of my Firewall appliance, so it's used mainly as 4G/LTE Modem (in the 
> LTE 800 MHz band) that does basically only NAT (eventually it can be 
> configured to work in Bridge mode) and it works quite well and it's 
> really stable (better than a copper asynchronous DSL connection, at 
> least here in Italy!).
>
> Maybe I misunderstood your real request, pardon me if I've done.
>
>
> Kind regards, Davide.
>
> On Fri, Oct 14, 2016 at 1:05 AM, Yasha Karant <[log in to unmask] 
> <mailto:[log in to unmask]>> wrote:
>
>     I need a 4G wireless USB WNIC and ISP (carrier) that is SL 7
>     compatible -- that is, that the drivers exist for SL 7, not just
>     MS Win or Mac OS X.  The service needs to be in my geographic
>     region; thus, I will check recommendations against service area
>     (several I have found do not serve my area).  I do not want to use
>     a MIFI access point unless a UTP hardwired 802.3 connection is
>     supported -- I do not want to use 802.11 or Bluetooth to connect
>     to the access point . Any suggestions greatly would be
>     appreciated.  Thus, a USB direct connection into the machine would
>     be best.
>
>     Yasha Karant
>
>



ATOM RSS1 RSS2