On 08/11/2015 12:29 PM, Yasha Karant wrote:
> On 08/11/2015 05:58 AM, Pat Riehecky wrote:
>>
>> On 08/11/2015 01:46 AM, Yasha Karant wrote:
>>> I have a colleague for whom I have installed IA-32 SL 6 .  She has 
>>> recently purchased a HP M225dw "all-in-one" laser printer. However, 
>>> I cannot find a driver for this printer for SL 6.  HP open systems 
>>> supported this printer starting with hplip-3.14.10, but I cannot 
>>> find this RPM for SL 6.  The current hplip distributed by HP 
>>> supports the M225dw, but will not install under SL 6.  At present, 
>>> the printer will not print from SL6 although the printer is 
>>> discovered over the LAN.  Any help or suggestions greatly would be 
>>> appreciated.
>>>
>>> Yasha Karant
>>
>> What version of hplip is installed on the system?
>>
>> Pat
>>
> hplip-3.12.4-6.el6.i686.rpm 
> <http://ftp1.scientificlinux.org/linux/scientific/6x/i386/os/Packages/hplip-3.12.4-6.el6.i686.rpm> 
> that is the most recent version I can find (could not find a more 
> recent one in EPEL, etc., that would work with IA-32 SL6)
> HPLIP 3.14.10 is the lowest rev level that supports the HP M225dw 
> (http://hplipopensource.com/hplip-web/release_notes.html, search on 
> 225dw, scroll up to find the release number).
> hplip-3.13.7-6.el7.x86_64.rpm 
> <http://ftp1.scientificlinux.org/linux/scientific/7x/x86_64/os/Packages/hplip-3.13.7-6.el7.x86_64.rpm>
> seems to be the current SL7 version, but that too will not support 
> this printer.  The RPM from HP for current, HPLIP 3.15.7, definitely 
> will not install on SL 6 IA-32 and I have not experimented with SL 7 
> X86-64.
>
> Has anyone ported HPLIP 3.14.10 or higher to IA-32 SL6?  to X86-64 
> SL7?  Does a CUPS that will run on IA-32 SL6 have support for a M225dw 
> (I cannot find a list of supported printers under CUPS)?
>
> Thanks,
>
> Yasha
>

The 6.7 BETA/rolling release includes a newer version of hplip.

Pat

-- 
Pat Riehecky
Scientific Linux developer

Fermi National Accelerator Laboratory
www.fnal.gov
www.scientificlinux.org