I'm having problems with an 6.7 install.  Here are the relevant lines:

# partitions

#clearpart --drives=disk/by-id/ata-SATA_SSD_96D70756062400160297
part /boot --fstype=ext4 --size=1024 --asprimary --ondisk=disk/by-id/ata-SATA_SSD_96D70756062400160297
part pv.01 --size=1 --grow --asprimary --ondisk=disk/by-id/ata-SATA_SSD_96D70756062400160297

volgroup sysvg pv.01
logvol swap --fstype=swap --vgname=svsvg --size=12288 --name=swap
logvol / --fstype=ext4 --vgname=sysvg --size=1 --grow --name=root


Kickstart stops trying to create the swap logical volume.  Claims there is no such sysvg volume.  I did an alt-F2 and ran parted on the disk.  The 'part' command never created the partitions.  This is my first time using the 'disk/by-id/...'  syntax.  Also, first time with an SSD disk.  I checked /dev/disk/by-id and the disk is listed with the correct id.

I'm going to prep the partitions with a rescuecd and try again.  I'd appreciate any suggestions you may have debugging this.

Has anyone tried the ssh option with kickstart?  I understand you can ssh to the machine and monitor it during the installation.  The one advantage I can see is the saved lines on a terminal window instead of the 80x24 console.