Sender: |
|
Date: |
Wed, 9 Aug 2017 07:59:08 -0700 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Message-ID: |
|
In-Reply-To: |
|
Content-Type: |
multipart/mixed;
boundary="1519320434-2102762697-1502290377=:22911" |
From: |
|
Parts/Attachments: |
|
|
On Wed, 9 Aug 2017, Akemi Yagi wrote:
> On Wed, Aug 9, 2017 at 4:27 AM, Bill Maidment <[log in to unmask]> wrote:
> Hi Pat
> I have updated my test system with all the sl-testing updates
> and after rebooting it doesn't recognise the on-board network
> connection.
> Motherboard is Asus M4N68T, but I don't know any details of the
> network chip.
> Rebooting to the old kernel recognises the on-board network
> connection OK.
> dmesg on the old kernel reveals
>
> [ 1.485449] r8169 0000:01:09.0 eth0: RTL8169sb/8110sb at
> 0xffffc90000c1ac00, a0:f3:c1:10:53:25, XID 10000000 IRQ 19
> [ 1.485451] r8169 0000:01:09.0 eth0: jumbo features [frames:
> 7152 bytes, tx checksumming: ok]
> [ 1.539302] forcedeth 0000:00:07.0: ifname eth0, PHY OUI
> 0x732 @ 1, addr e0:cb:4e:c2:6f:10
>
> Perhaps I need to install a forcedeth driver for the new kernel?
The forcedeth driver is not supported at SL7, but is available in
elrepo.
If this driver was installed previously as a kmod driver then it should have
worked on the 7.4 upgrade; you probably should look for it with:
rpm -qa |grep forcedeth
Do you recall how it was installed?
cheers, etc.
denice
--
deatrich @ triumf.ca, Science/ATLAS PH: +1 604-222-7665
<*> This moment's fortune cookie:
It is impossible to make anything foolproof because fools are so ingenious.
|
|
|