On 08/11/2015 12:29 PM, Yasha Karant
wrote:
[log in to unmask]" type="cite">
On 08/11/2015 05:58 AM, Pat Riehecky
wrote:
[log in to unmask]" type="cite">
On 08/11/2015 01:46 AM, Yasha Karant wrote:
I have a colleague for whom I have
installed IA-32 SL 6 . She has recently purchased a HP M225dw
"all-in-one" laser printer. However, I cannot find a driver
for this printer for SL 6. HP open systems supported this
printer starting with hplip-3.14.10, but I cannot find this
RPM for SL 6. The current hplip distributed by HP supports
the M225dw, but will not install under SL 6. At present, the
printer will not print from SL6 although the printer is
discovered over the LAN. Any help or suggestions greatly
would be appreciated.
Yasha Karant
What version of hplip is installed on the system?
Pat
hplip-3.12.4-6.el6.i686.rpm
that is the most recent version I can find (could not find a more
recent one in EPEL, etc., that would work with IA-32 SL6)
HPLIP 3.14.10 is the lowest rev level that supports the HP M225dw
(http://hplipopensource.com/hplip-web/release_notes.html,
search on 225dw, scroll up to find the release number).
hplip-3.13.7-6.el7.x86_64.rpm
seems to be the current SL7 version, but that too will not support
this printer. The RPM from HP for current, HPLIP 3.15.7,
definitely will not install on SL 6 IA-32 and I have not
experimented with SL 7 X86-64.
Has anyone ported HPLIP 3.14.10 or higher to IA-32 SL6? to X86-64
SL7? Does a CUPS that will run on IA-32 SL6 have support for a
M225dw (I cannot find a list of supported printers under CUPS)?
Thanks,
Yasha
The 6.7 BETA/rolling release includes a newer version of hplip.
Pat
--
Pat Riehecky
Scientific Linux developer
Fermi National Accelerator Laboratory
www.fnal.gov
www.scientificlinux.org