On 08/11/2015 11:02 AM, Akemi Yagi wrote: > On Tue, Aug 11, 2015 at 10:29 AM, Yasha Karant <[log in to unmask]> wrote: > >> On 08/11/2015 01:46 AM, Yasha Karant wrote: >> >> I have a colleague for whom I have installed IA-32 SL 6 . She has recently >> purchased a HP M225dw "all-in-one" laser printer. However, I cannot find a >> driver for this printer for SL 6. HP open systems supported this printer >> starting with hplip-3.14.10, but I cannot find this RPM for SL 6. The >> current hplip distributed by HP supports the M225dw, but will not install >> under SL 6. At present, the printer will not print from SL6 although the >> printer is discovered over the LAN. Any help or suggestions greatly would >> be appreciated. >> >> Yasha Karant >> hplip-3.12.4-6.el6.i686.rpm that is the most recent version I can find >> (could not find a more recent one in EPEL, etc., that would work with IA-32 >> SL6) >> HPLIP 3.14.10 is the lowest rev level that supports the HP M225dw >> (http://hplipopensource.com/hplip-web/release_notes.html, search on 225dw, >> scroll up to find the release number). > Within that site, I see the following page: > > http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_pro_mfp_m225dw.html > > Scroll down and you'll find 'Red Hat Enterprise Linux 6.0 and 7.0' > both showing "Yes". It looks as if the installer works there. > > Akemi Akemi, That is what I tried at first. It would not install and properly function, claims not withstanding. I tried yum install (from a terminal, not the GUI) but it would not work due to a python error (too old a version, ... ) -- I did not record the error message, and thus only am relating from memory. When I get to the machine on which I tried this, I will record the exact errors. Yasha