Hi, I'm having issues getting SL6 installed on systems with more than one network interface. Since the network interface could be either eth0 or eth1 depending on the server, we normally specify the kickstart network device by MAC-address as boot option, e.g.: == ksdevice=11:22:33:44:55:66 == And specify a static IP-address (the same as assigned by DHCP), without explicity naming an Ethernet device in the kickstart file, e.g.: == network --bootproto=static --ip=10.0.0.10 --netmask=255.255.255.0 -- gateway=10.0.0.1 --nameserver=127.0.0.1 --hostname=hostname == Under Centos 5.5 and Fedora this works correctly, and causes the network device specified by ksdevice to be used. However it does not seems to work with SL6 beta. It does get a DHCP lease on the right interface, downloads the kickstart file and the first installer files, but then it always configures "eth0" with the network information specified, instead of the actual ksdevice. This is an issue if the ksdevice is actually eth1. Because eth1 was assigned the IP-address by DHCP, and SL assigns the same IP- address to eth0 as well, network connectivity breaks, and it throws an error that it is unable to download the other installation packages. Yours sincerely, Floris Bos