Hi, I have configured RAID 1 (Mirroring) in BIOS. The driver file i have copied to floppy and installed linux by linux dd option so that it can detect the RAID Configured disk. In RedHat, it is detecting hard disk and i am able to install, but in Scientific Linux installation when i proceed with the same it is showing the following Error: No Hard Drives have been found. You probably need to manually chose device drivers for,the installation to succeed. Would you like to select drivers now. Thanks. > ----- Original Message ----- > From: "Connie Sieh" <[log in to unmask]> > To: "Ana Vasan" <[log in to unmask]> > Subject: Re: Driver compatilbilty > Date: Mon, 13 Nov 2006 10:41:20 -0600 (CST) > > > On Mon, 13 Nov 2006, Ana Vasan wrote: > > > Hi, > > I have posted the same to Intel and they have replied that it wont = > > support for Scientific Linux. So give me ur suggestions how to procee= > > d with this issue. > > > > Thanks. > > > > > > > > > ----- Original Message ----- > > > From: [log in to unmask] > > > To: [log in to unmask] > > > Subject: Re: Driver compatilbilty > > > Date: Sat, 11 Nov 2006 10:25:43 -0600 (CST) > > >=20 > > >=20 > > > Ana Vasan said... > > >=20 > > > | I am having the driver for onboard SATA RAID -- Red Hat 4.0= > > =20 > > > Update 2 Kernel 2.6.9-22 for Intel SE7230NHl-E. But it is not=20 > > > getting installed in Scientific Linux 4.2 which have the same=20 > > > kernel version 2.6.9-22. > > Where did you get this driver from? How are you installing it? Why do > you think it is not working? What error messages are you getting? > > -Connie Sieh > > > > | As Scientific Linux is based on red hat i thought so. I need= > > =20 > > > to know whether the driver provided will be compatible for both Red= > > =20 > > > Hat and Scientific Linux. If not, where could I get the drivers for= > > =20 > > > Scientific Linux. > > >=20 > > > Is it complaining at all? > > >=20 > > > Some packages look for a specific package with a RedHat > > > name component (such as RHEL). In that case you'll > > > need to do something like > > >=20 > > > rpm -i --nodeps foo.rpm > > >=20 > > > or > > >=20 > > > rpm -i --force --nodeps foo.rpm > > >=20 > > > -Miles > > > > > > > > > > > --=20 > > _______________________________________________ > > Get your free email from http://www.linuxmail.org > > > > Powered by Outblaze > > > -- _______________________________________________ Get your free email from http://www.linuxmail.org Powered by Outblaze