One additional possibility. My laptop is running IA-32 SL6x (I fully
understand that this will not be possible for SL7 that
will require me to enable the laptop as X86-64 64 bit mode). Paraview
works fine there. I thus downloaded from EPEL
the IA-32 version to run on my office workstation that is running X86-64
SL6x (and thus previously I had installed and attempted to run the
X86-64 version of paraview). The yum install output appears below;
however, I answered N to terminate the install as it appears to
be updating a number of various gcc and associated library files and
utilities. My understanding is that these are an integral part of
Linux system execution and any mismatch can cause full operating system
failure. Is this correct or should I proceed?
Thanks.
[root@jb344 Downloads]# yum install paraview-3.8.1-2.el6.i686.rpm
Loaded plugins: downloadonly, priorities, refresh-packagekit, security,
tmprepo,
: verify
Setting up Install Process
Examining paraview-3.8.1-2.el6.i686.rpm: paraview-3.8.1-2.el6.i686
Marking paraview-3.8.1-2.el6.i686.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package paraview.i686 0:3.8.1-2.el6 will be installed
--> Processing Dependency: paraview-data = 3.8.1-2.el6 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libOSMesa.so.6 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtCLucene.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtCore.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtGui.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtHelp.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtNetwork.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtSql.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libQtXml.so.4 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libhdf5.so.6 for package:
paraview-3.8.1-2.el6.i686
--> Processing Dependency: libpython2.6.so.1.0 for package:
paraview-3.8.1-2.el6.i686
--> Running transaction check
---> Package hdf5.i686 0:1.8.5.patch1-7.el6 will be installed
--> Processing Dependency: libgfortran.so.3(GFORTRAN_1.0) for package:
hdf5-1.8.5.patch1-7.el6.i686
--> Processing Dependency: libgfortran.so.3 for package:
hdf5-1.8.5.patch1-7.el6.i686
---> Package mesa-libOSMesa.x86_64 0:9.0-0.8.el6_4.3 will be updated
---> Package mesa-libOSMesa.i686 0:9.2-0.5.el6_5.2 will be installed
---> Package mesa-libOSMesa.x86_64 0:9.2-0.5.el6_5.2 will be an update
---> Package paraview-data.noarch 0:3.8.1-2.el6 will be installed
---> Package python-libs.x86_64 0:2.6.6-51.el6 will be updated
--> Processing Dependency: python-libs(x86-64) = 2.6.6-51.el6 for
package: python-2.6.6-51.el6.x86_64
---> Package python-libs.i686 0:2.6.6-52.el6 will be installed
--> Processing Dependency: libgdbm.so.2 for package:
python-libs-2.6.6-52.el6.i686
--> Processing Dependency: libffi.so.5 for package:
python-libs-2.6.6-52.el6.i686
---> Package python-libs.x86_64 0:2.6.6-52.el6 will be an update
---> Package qt.x86_64 1:4.6.2-26.el6_4 will be updated
--> Processing Dependency: qt = 1:4.6.2-26.el6_4 for package:
1:qt-doc-4.6.2-26.el6_4.noarch
--> Processing Dependency: qt(x86-64) = 1:4.6.2-26.el6_4 for package:
1:qt-sqlite-4.6.2-26.el6_4.x86_64
--> Processing Dependency: qt(x86-64) = 1:4.6.2-26.el6_4 for package:
1:qt-mysql-4.6.2-26.el6_4.x86_64
--> Processing Dependency: qt(x86-64) = 1:4.6.2-26.el6_4 for package:
1:qt-devel-4.6.2-26.el6_4.x86_64
---> Package qt.i686 1:4.6.2-28.el6_5 will be installed
---> Package qt.x86_64 1:4.6.2-28.el6_5 will be an update
---> Package qt-x11.x86_64 1:4.6.2-26.el6_4 will be updated
---> Package qt-x11.i686 1:4.6.2-28.el6_5 will be installed
--> Processing Dependency: qt-sqlite(x86-32) = 1:4.6.2-28.el6_5 for
package: 1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: phonon-backend(x86-32) >= 4.3 for package:
1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: libmng.so.1 for package:
1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: libgstvideo-0.10.so.0 for package:
1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: libgstreamer-0.10.so.0 for package:
1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: libgstinterfaces-0.10.so.0 for package:
1:qt-x11-4.6.2-28.el6_5.i686
--> Processing Dependency: libgstbase-0.10.so.0 for package:
1:qt-x11-4.6.2-28.el6_5.i686
---> Package qt-x11.x86_64 1:4.6.2-28.el6_5 will be an update
--> Running transaction check
---> Package gdbm.i686 0:1.8.0-36.el6 will be installed
---> Package gstreamer.i686 0:0.10.29-1.el6 will be installed
---> Package gstreamer-plugins-base.i686 0:0.10.29-2.el6 will be installed
--> Processing Dependency: libvorbisenc.so.2 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libvorbis.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libvisual-0.4.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libtheoraenc.so.1(libtheoraenc_1.0) for
package: gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libtheoraenc.so.1 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libtheoradec.so.1(libtheoradec_1.0) for
package: gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libtheoradec.so.1 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: liboil-0.3.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libogg.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libgudev-1.0.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libcdda_paranoia.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libcdda_interface.so.0 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
--> Processing Dependency: libXv.so.1 for package:
gstreamer-plugins-base-0.10.29-2.el6.i686
---> Package libffi.i686 0:3.0.5-3.2.el6 will be installed
---> Package libgfortran.x86_64 0:4.4.7-3.el6 will be updated
--> Processing Dependency: libgfortran = 4.4.7-3.el6 for package:
gcc-gfortran-4.4.7-3.el6.x86_64
---> Package libgfortran.i686 0:4.4.7-4.el6 will be installed
---> Package libgfortran.x86_64 0:4.4.7-4.el6 will be an update
---> Package libmng.i686 0:1.0.10-4.1.el6 will be installed
--> Processing Dependency: liblcms.so.1 for package:
libmng-1.0.10-4.1.el6.i686
---> Package phonon-backend-gstreamer.x86_64 1:4.6.2-26.el6_4 will be
updated
---> Package phonon-backend-gstreamer.i686 1:4.6.2-28.el6_5 will be
installed
---> Package phonon-backend-gstreamer.x86_64 1:4.6.2-28.el6_5 will be an
update
---> Package python.x86_64 0:2.6.6-51.el6 will be updated
--> Processing Dependency: python = 2.6.6-51.el6 for package:
tkinter-2.6.6-51.el6.x86_64
--> Processing Dependency: python(x86-64) = 2.6.6-51.el6 for package:
python-devel-2.6.6-51.el6.x86_64
---> Package python.x86_64 0:2.6.6-52.el6 will be an update
---> Package qt-devel.x86_64 1:4.6.2-26.el6_4 will be updated
---> Package qt-devel.x86_64 1:4.6.2-28.el6_5 will be an update
---> Package qt-doc.noarch 1:4.6.2-26.el6_4 will be updated
---> Package qt-doc.noarch 1:4.6.2-28.el6_5 will be an update
---> Package qt-mysql.x86_64 1:4.6.2-26.el6_4 will be updated
---> Package qt-mysql.x86_64 1:4.6.2-28.el6_5 will be an update
---> Package qt-sqlite.x86_64 1:4.6.2-26.el6_4 will be updated
---> Package qt-sqlite.i686 1:4.6.2-28.el6_5 will be installed
---> Package qt-sqlite.x86_64 1:4.6.2-28.el6_5 will be an update
--> Running transaction check
---> Package cdparanoia-libs.i686 0:10.2-5.1.el6 will be installed
---> Package gcc-gfortran.x86_64 0:4.4.7-3.el6 will be updated
---> Package gcc-gfortran.x86_64 0:4.4.7-4.el6 will be an update
--> Processing Dependency: gcc = 4.4.7-4.el6 for package:
gcc-gfortran-4.4.7-4.el6.x86_64
---> Package lcms-libs.i686 0:1.19-1.el6 will be installed
---> Package libXv.i686 0:1.0.7-2.el6 will be installed
---> Package libgudev1.x86_64 0:147-2.46.el6_4.2 will be updated
---> Package libgudev1.i686 0:147-2.51.el6 will be installed
--> Processing Dependency: libudev = 147-2.51.el6 for package:
libgudev1-147-2.51.el6.i686
--> Processing Dependency: libudev.so.0 for package:
libgudev1-147-2.51.el6.i686
---> Package libgudev1.x86_64 0:147-2.51.el6 will be an update
---> Package libogg.i686 2:1.1.4-2.1.el6 will be installed
---> Package liboil.i686 0:0.3.16-4.1.el6 will be installed
---> Package libtheora.i686 1:1.1.0-2.el6 will be installed
---> Package libvisual.x86_64 0:0.4.0-9.1.el6 will be updated
---> Package libvisual.i686 0:0.4.0-10.el6 will be installed
---> Package libvisual.x86_64 0:0.4.0-10.el6 will be an update
---> Package libvorbis.i686 1:1.2.3-4.el6_2.1 will be installed
---> Package python-devel.x86_64 0:2.6.6-51.el6 will be updated
---> Package python-devel.x86_64 0:2.6.6-52.el6 will be an update
---> Package tkinter.x86_64 0:2.6.6-51.el6 will be updated
---> Package tkinter.x86_64 0:2.6.6-52.el6 will be an update
--> Running transaction check
---> Package gcc.x86_64 0:4.4.7-3.el6 will be updated
--> Processing Dependency: gcc = 4.4.7-3.el6 for package:
gcc-c++-4.4.7-3.el6.x86_64
---> Package gcc.x86_64 0:4.4.7-4.el6 will be an update
--> Processing Dependency: libgomp = 4.4.7-4.el6 for package:
gcc-4.4.7-4.el6.x86_64
--> Processing Dependency: cpp = 4.4.7-4.el6 for package:
gcc-4.4.7-4.el6.x86_64
--> Processing Dependency: libgcc >= 4.4.7-4.el6 for package:
gcc-4.4.7-4.el6.x86_64
---> Package libudev.x86_64 0:147-2.46.el6_4.2 will be updated
---> Package libudev.i686 0:147-2.51.el6 will be installed
---> Package libudev.x86_64 0:147-2.51.el6 will be an update
--> Running transaction check
---> Package cpp.x86_64 0:4.4.7-3.el6 will be updated
---> Package cpp.x86_64 0:4.4.7-4.el6 will be an update
---> Package gcc-c++.x86_64 0:4.4.7-3.el6 will be updated
---> Package gcc-c++.x86_64 0:4.4.7-4.el6 will be an update
--> Processing Dependency: libstdc++-devel = 4.4.7-4.el6 for package:
gcc-c++-4.4.7-4.el6.x86_64
--> Processing Dependency: libstdc++ = 4.4.7-4.el6 for package:
gcc-c++-4.4.7-4.el6.x86_64
---> Package libgcc.i686 0:4.4.7-3.el6 will be updated
---> Package libgcc.x86_64 0:4.4.7-3.el6 will be updated
---> Package libgcc.i686 0:4.4.7-4.el6 will be an update
---> Package libgcc.x86_64 0:4.4.7-4.el6 will be an update
---> Package libgomp.x86_64 0:4.4.7-3.el6 will be updated
---> Package libgomp.x86_64 0:4.4.7-4.el6 will be an update
--> Running transaction check
---> Package libstdc++.i686 0:4.4.7-3.el6 will be updated
---> Package libstdc++.x86_64 0:4.4.7-3.el6 will be updated
---> Package libstdc++.i686 0:4.4.7-4.el6 will be an update
---> Package libstdc++.x86_64 0:4.4.7-4.el6 will be an update
---> Package libstdc++-devel.x86_64 0:4.4.7-3.el6 will be updated
---> Package libstdc++-devel.x86_64 0:4.4.7-4.el6 will be an update
epel/filelists_db | 8.9 MB 00:02
google-chrome/filelists | 1.6 kB 00:00
--> Finished Dependency Resolution
Dependencies Resolved
===============================================================================
Package Arch Version Repository Size
===============================================================================
Installing:
paraview i686 3.8.1-2.el6 /paraview-3.8.1-2.el6.i686
100 M
Installing for dependencies:
cdparanoia-libs i686 10.2-5.1.el6 sl6x 45 k
gdbm i686 1.8.0-36.el6 sl6x 28 k
gstreamer i686 0.10.29-1.el6 sl6x 752 k
gstreamer-plugins-base i686 0.10.29-2.el6 sl6x 927 k
hdf5 i686 1.8.5.patch1-7.el6
epel 1.2 M
lcms-libs i686 1.19-1.el6 sl6x 100 k
libXv i686 1.0.7-2.el6 sl6x 23 k
libffi i686 3.0.5-3.2.el6 sl6x 22 k
libgfortran i686 4.4.7-4.el6 sl6x 242 k
libgudev1 i686 147-2.51.el6 sl6x 60 k
libmng i686 1.0.10-4.1.el6 sl6x 170 k
libogg i686 2:1.1.4-2.1.el6 sl6x
21 k
liboil i686 0.3.16-4.1.el6 sl6x 119 k
libtheora i686 1:1.1.0-2.el6 sl6x 131 k
libudev i686 147-2.51.el6 sl6x 75 k
libvisual i686 0.4.0-10.el6 sl6x-fastbugs 134 k
libvorbis i686 1:1.2.3-4.el6_2.1
sl6x 156 k
mesa-libOSMesa i686 9.2-0.5.el6_5.2 sl6x-fastbugs
3.0 M
paraview-data noarch 3.8.1-2.el6 epel 12 k
phonon-backend-gstreamer i686 1:4.6.2-28.el6_5 sl6x-fastbugs
125 k
python-libs i686 2.6.6-52.el6 sl6x-fastbugs 5.3 M
qt i686 1:4.6.2-28.el6_5 sl6x-fastbugs
4.0 M
qt-sqlite i686 1:4.6.2-28.el6_5
sl6x-fastbugs 50 k
qt-x11 i686 1:4.6.2-28.el6_5
sl6x-fastbugs 12 M
Updating for dependencies:
cpp x86_64 4.4.7-4.el6 sl6x 3.7 M
gcc x86_64 4.4.7-4.el6 sl6x 10 M
gcc-c++ x86_64 4.4.7-4.el6 sl6x 4.7 M
gcc-gfortran x86_64 4.4.7-4.el6 sl6x 4.7 M
libgcc i686 4.4.7-4.el6 sl6x 111 k
libgcc x86_64 4.4.7-4.el6 sl6x 100 k
libgfortran x86_64 4.4.7-4.el6 sl6x 265 k
libgomp x86_64 4.4.7-4.el6 sl6x 117 k
libgudev1 x86_64 147-2.51.el6 sl6x 60 k
libstdc++ i686 4.4.7-4.el6 sl6x 299 k
libstdc++ x86_64 4.4.7-4.el6 sl6x 292 k
libstdc++-devel x86_64 4.4.7-4.el6 sl6x 1.6 M
libudev x86_64 147-2.51.el6 sl6x 73 k
libvisual x86_64 0.4.0-10.el6 sl6x-fastbugs 134 k
mesa-libOSMesa x86_64 9.2-0.5.el6_5.2 sl6x-fastbugs
3.0 M
phonon-backend-gstreamer x86_64 1:4.6.2-28.el6_5 sl6x-fastbugs
126 k
python x86_64 2.6.6-52.el6 sl6x-fastbugs 73 k
python-devel x86_64 2.6.6-52.el6 sl6x-fastbugs 170 k
python-libs x86_64 2.6.6-52.el6 sl6x-fastbugs 5.3 M
qt x86_64 1:4.6.2-28.el6_5 sl6x-fastbugs
3.9 M
qt-devel x86_64 1:4.6.2-28.el6_5 sl6x-fastbugs
9.8 M
qt-doc noarch 1:4.6.2-28.el6_5
sl6x-fastbugs 92 M
qt-mysql x86_64 1:4.6.2-28.el6_5
sl6x-fastbugs 58 k
qt-sqlite x86_64 1:4.6.2-28.el6_5
sl6x-fastbugs 50 k
qt-x11 x86_64 1:4.6.2-28.el6_5
sl6x-fastbugs 12 M
tkinter x86_64 2.6.6-52.el6 sl6x-fastbugs 255 k
Transaction Summary
===============================================================================
Install 25 Package(s)
Upgrade 26 Package(s)
Total size: 282 M
Total download size: 182 M
Is this ok [y/N]:
On 10/09/2014 12:09 PM, Yasha Karant wrote:
> Two information items:
>
> 1. I did yum remove (all existing paraview rpm installs) followed by
> the GUI install of the X86-64 versions from EPEL referenced below in
> this thread. Execution of paraview failed in the same manner --
> immediate "death" of X
>
> 2. As I maintained a login screen as a terminal on a different screen
> (ctrl-alt-F4), the postmortem in ~/.xsession-errors, where ~ is my
> home (not root) directory. is
>
> paraview: Fatal IO error: client killed
>
> with no additional messages
>
> I can provide the various log files in /var/log if this will help.
>
> Any additional suggestions? Is there a way to execute paraview within
> some sort of tracing shell to find the exact call or calls that failed?
>
> Thanks,
>
> Yasha Karant
>
> On 10/09/2014 02:59 AM, Horst Hettrich wrote:
>> Hello,
>>
>> I installed paraview from the epel repo (version: 3.8.1-2). This runs
>> without any problems.
>>
>> Best regards,
>>
>> Horst
>>
>> On Wed, Oct 08, 2014 at 06:01:10PM -0700, Yasha Karant wrote:
>>> I have downloaded and yum installed
>>>
>>> paraview-3.10.1-4.el6.x86_64.rpm
>>>
>>> paraview-data-3.10.1-4.el6.noarch.rpm
>>>
>>> The application installs, but immediately crashes X windows.
>>> /var/log/Xorg.*.log and /var/log/messages, and the like, show
>>> nothing obvious (to me). The screen goes black, and then I am back
>>> to the window manager SL 6 login splash screen. The
>>> system allows me to log in and everything works unless I again
>>> invoke paraview, in which case the cycle repeats.
>>>
>>> Does anyone have a working EL 6 X86-64 paraview, and if so, was it
>>> an RPM install, the binaries as provided by Paraview as
>>> a tar.gz file, or was it built from source? How is it configured?
>>>
>>> Thus far, there has been response via the paraview list (a different
>>> list than SL).
>>>
>>> Yasha Karant
|
