On 05/03/13 19:13, Mahmood Naderan wrote:
> Thank you very much for the replies.
> In my previous try I didn't enter 5901, so I think by default it uses 5900.
> As I posted earlier, 5900 doesn't work. Instead 5901 works.
> 
> I don't know why but is it OK.

Then you need to look at your Xvnc configuration and see there why it
chose 5901 instead of 5900.  It might even be that something else was
running on port 5900 when Xvnc started, so it chose 5901.  Anyhow, we
don't have enough info to do any educated guesses why that happens.  So
start by looking at config files and log files.  For more info, also
consult the man pages.


--
kind regards,

David Sommerseth


> ------------------------------------------------------------------------
> *From:* David Sommerseth <[log in to unmask]>
> *To:* Mahmood Naderan <[log in to unmask]>
> *Cc:* Eero Volotinen <[log in to unmask]>;
> "[log in to unmask]" <[log in to unmask]>
> *Sent:* Tuesday, March 5, 2013 9:40 PM
> *Subject:* Re: troubleshooting vnc
> 
> On 05/03/13 18:59, Mahmood Naderan wrote:
>> C:\Users\mahmood>telnet IP 5900
>> Connecting To IP...Could not open connection to the host, on port 59
>> 00: Connect failed
>>
>>
>> But
>>
>> C:\Users\mahmood>telnet IP 5901
>> RFB 003.008
>>            status
>> displa
>>
>> Connection to host lost.
>>
> 
> You have no problems now ... just run your favourite VNC client on your
> box and connect to  IP:1  or  IP:5901
> 
> And it should just work.
> 
> 
> --
> kind regards,
> 
> David Sommerseth
> 
>> ------------------------------------------------------------------------
>> *From:* Eero Volotinen <[log in to unmask]
> <mailto:[log in to unmask]>>
>> *To:* Mahmood Naderan <[log in to unmask] <mailto:[log in to unmask]>>
>> *Cc:* [log in to unmask]
> <mailto:[log in to unmask]>
>> *Sent:* Tuesday, March 5, 2013 9:06 PM
>> *Subject:* Re: troubleshooting vnc
>>
>>> Using cmd.exe from windows 7, here is the output
>>> C:\Users\mahmood>telnet IP
>>> Connecting To IP...Could not open connection to the host, on port 23
>>> : Connect failed
>>
>> correct syntax for telnet is :
>>
>> telnet ip.address port-number (for ex telnet 192.168.0.2 5901)
>>
>> --
>> Eero
>>
>>
> 
> 
>