Subject: | |
From: | |
Reply To: | |
Date: | Thu, 3 Jun 2010 04:23:56 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
-- Le (On) 2010-06-02 -0700 à (at) 13:53:15 Akemi Yagi écrivit (wrote): --
> On Tue, Jun 1, 2010 at 3:38 PM, Franchisseur Robert
> <[log in to unmask]> wrote:
> > -- Le (On) 2010-05-27 +0200 à (at) 20:25:21 FRANCHISSEUR Robert écrivit (wrote): --
>
> >> > options snd-hda-intel index=0 enable_msi=0
> >> >
> >> > in /etc/modprobe.conf . Could you test to see if this rectify the
> >> > problem for you?
>
> >> Thank you very much indeed it works :-)
>
> > I get back as in fact it works for 4 among our 5 Optiplex 740.
> >
> > The one on which 'enable_msi=0' does nothing is older
> > 05/12/2007 (versus 08/07/2009), has a BIOS Version:1.2.2
> > Release Date: 10/11/2007 (versus Version: 2.2.2 Release Date:
> > 04/01/2009) and the only difference in lspi is the graphic
> > card :
> >
> > 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce 6150 LE] (rev a2)
> > versus
> > 03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300 GE] (rev a1)
>
> Can you update the BIOS of that machine to the same level as others?
> Other than that, I do not have any idea as to why only that one is
> still problematic.
>
I tried but there is only a windows version of the bios which
does not fit on a floppy (1.8Mb)
ls -lh O740-224.EXE
-rw-r--r-- 1 bob bob 1.8M Mon May 31 21:38:45 2010 O740-224.EXE
I then tried to use biosdisk-0.75-2.noarch.rpm (found on
linux.dell.com/biosdisk/) but I got the same problem as it
uses a dosdisk.img too small too (1.4M).
So as soon as I have a little time I am going to read a few
documentation to find how to make a dos image bigger.
--
Best regards,
Robert FRANCHISSEUR
____ Apollo_gist :-)_______________________________________________
| Robert FRANCHISSEUR |
| Laboratoire de Météorologie Dynamique - C.N.R.S. |
| Equipe "R.A.M.S.E.S." - UPMC - Tour 45-55 3ème 315C |
| Boite 99 - 4, place Jussieu F-75252 PARIS CEDEX 05 FRANCE |
| Phone : +33 (0)1 44 27 73 87 fax : +33 (0)1 44 27 62 72 |
| e-mail : robert at lmd . jussieu . fr http://www.lmd.jussieu.fr |
-------------------------------------------------------------------
|
|
|