Subject: | |
From: | |
Reply To: | Stephen J. Gowdy |
Date: | Thu, 4 Feb 2010 15:19:57 +0100 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Looks like it should work. Is there nothing in dmesg output about it?
On Thu, 4 Feb 2010, Gasser Marc wrote:
> thank you for the reply.
> Well, it does and the driver is loaded (outputs below).
>
> Maybe you could test your phone once with SL and give me some
> feedback, that would be great. However, it's not urgent.
>
> Marc
>
>
> #### cat /proc/bus/usb/devices
> T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2
> P: Vendor=0421 ProdID=01c7 Rev= 3.16
> S: Manufacturer=Nokia
> S: Product=N900 (Storage Mode)
> S: SerialNumber=372041756775
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
> C: #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
>
> ### cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: WDC WD2500AAJS-0 Rev: 01.0
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: TSSTcorp Model: CDDVDW TS-H653G Rev: FS00
> Type: CD-ROM ANSI SCSI revision: 05
> Host: scsi8 Channel: 00 Id: 00 Lun: 00
> Vendor: Nokia Model: N900 Rev: 031
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi8 Channel: 00 Id: 00 Lun: 01
> Vendor: Nokia Model: N900 Rev: 031
> Type: Direct-Access ANSI SCSI revision: 02
>
>
> ########################################################################
> Stephen J. Gowdy wrote:
>> usb-storage module should be loaded automatically and it should end up
>> in /proc/scsi/scsi.
>>
>> I have the same phone so could have checked if I had the USB cable
>> with me... I have used it with Fedora 12 after selecting Storage Mode
>> on the phone (it looks like you did from below).
>>
>> What does /proc/bus/usb/devices show? It should have usb-storage
>> listed as the Driver= for it.
>>
>> On Thu, 4 Feb 2010, Gasser Marc wrote:
>>
>>> Hello,
>>>
>>> anybody has an idea how to mount a mobile phone via usb
>>> in SL51.
>>> Neither fdisk -l nor parted can see a device file for the mobile,
>>> only lsusb (see below) shows that it is plugged in.
>>>
>>> Thanks for help.
>>>
>>> Regards,
>>> Marc Gasser
>>> PSI-Villigen, CH
>>>
>>> ### output of lsusb -v
>>> Bus 007 Device 004: ID 0421:01c7 Nokia Mobile Phones
>>> Device Descriptor:
>>> bLength 18
>>> bDescriptorType 1
>>> bcdUSB 2.00
>>> bDeviceClass 0 (Defined at Interface level)
>>> bDeviceSubClass 0
>>> bDeviceProtocol 0
>>> bMaxPacketSize0 64
>>> idVendor 0x0421 Nokia Mobile Phones
>>> idProduct 0x01c7
>>> bcdDevice 3.16
>>> iManufacturer 1 Nokia
>>> iProduct 2 N900 (Storage Mode)
>>> iSerial 3 372041756775
>>> bNumConfigurations 2
>>> Configuration Descriptor:
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 32
>>> bNumInterfaces 1
>>> bConfigurationValue 1
>>> iConfiguration 4 Max power
>>> bmAttributes 0x80
>>> MaxPower 500mA
>>> Interface Descriptor:
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 2
>>> bInterfaceClass 8 Mass Storage
>>> bInterfaceSubClass 6 SCSI
>>> bInterfaceProtocol 80 Bulk (Zip)
>>> iInterface 6 Mass Storage
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x81 EP 1 IN
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0200 1x 512 bytes
>>> bInterval 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x01 EP 1 OUT
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0200 1x 512 bytes
>>> bInterval 1
>>> Configuration Descriptor:
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 32
>>> bNumInterfaces 1
>>> bConfigurationValue 2
>>> iConfiguration 5 Self-powered
>>> bmAttributes 0xc0
>>> Self Powered
>>> MaxPower 100mA
>>> Interface Descriptor:
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 2
>>> bInterfaceClass 8 Mass Storage
>>> bInterfaceSubClass 6 SCSI
>>> bInterfaceProtocol 80 Bulk (Zip)
>>> iInterface 6 Mass Storage
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x81 EP 1 IN
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0200 1x 512 bytes
>>> bInterval 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x01 EP 1 OUT
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0200 1x 512 bytes
>>> bInterval 1
>>> Device Qualifier (for other device speed):
>>> bLength 10
>>> bDescriptorType 6
>>> bcdUSB 2.00
>>> bDeviceClass 0 (Defined at Interface level)
>>> bDeviceSubClass 0
>>> bDeviceProtocol 0
>>> bMaxPacketSize0 64
>>> bNumConfigurations 2
>>>
>>
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | CERN Office: 8-1-11|
|http://cern.ch/gowdy/ | CH-1211 Geneva 23 |
| | Switzerland |
|EMail: [log in to unmask] | Tel: +41 76 487 2215 |
\------------------------------------+-------------------------/
|
|
|