Subject: | |
From: | |
Reply To: | |
Date: | Tue, 19 Feb 2008 16:03:00 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
The SL 5.1 anaconda just crashed on me three times, fortunately before it
formatted the partitions.
After I had finished setting up the partitions and networking and packages,
after it had verified the consistency of the packages, I came to a window
that prompted me if I wanted to start the installation. I clicked "Next"
and got an error dialog:
================================================================
Error informing the kernel about modifications to partition/dev/sda5--Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 until you reboot--so you shouldn't mount it or use it in any way before rebooting.
================================================================
It prompted me to "ignore" or "cancel". I tried it each way, with the same
result: an exception window, and no choice but to re-boot.
================================================================
Exception Occurred
...
/tmp/treedir/12334/instimage/usr/lib/anaconda/partedUtils.py line 892, in savePartition disk.commit()
" " /packages.py, line 147, in turnOnFilesystems anaconda.id.diskset.savePartitions()
================================================================
The machine is a 2411 MHz x86_64 dual-core (family 15 model37) with 8GB RAM.
It has a Fiber Channel connection (I tried the install both
connected and unconnected).
It also has an IPMI card.
The system hard disk is nothing special (maybe a little over-partitioned)
------------------------------------------------------------------
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 2063536 465460 1493252 24% /
/dev/sda1 101105 30332 65552 32% /boot
none 4081032 0 4081032 0% /dev/shm
/dev/sda6 10325780 497152 9304108 6% /opt
/dev/sda7 8262068 131260 7711112 2% /tmp
/dev/sda5 10325780 7714352 2086908 79% /usr
/dev/sda8 5162828 680644 4219924 14% /var
/dev/sda9 87033536 6825444 79323876 8% /work1
/dev/sda10 87025504 739156 85402212 1% /work2
/dev/sda11 87033536 89840 86059480 1% /work3
------------------------------------------------------------------
$ /sbin/fdisk
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 1319 10490445 82 Linux swap
/dev/sda3 1320 1580 2096482+ 83 Linux
/dev/sda4 1581 38913 299877322+ 5 Extended
/dev/sda5 1581 2886 10490444+ 83 Linux
/dev/sda6 2887 4192 10490444+ 83 Linux
/dev/sda7 4193 5237 8393962 83 Linux
/dev/sda8 5238 5890 5245222 83 Linux
/dev/sda9 5891 16898 88421728+ 83 Linux
/dev/sda10 16899 27905 88413696 83 Linux
/dev/sda11 27906 38913 88421728+ 83 Linux
------------------------------------------------------------------
$ ipmitool -I open mc info
Device ID : 32
Device Revision : 0
Firmware Revision : 0.20
IPMI Version : 2.0
Manufacturer ID : 6653
Manufacturer Name : Tyan Computer Corporation
Product ID : 2892 (0x0b4c)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Bridge
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00
------------------------------------------------------------------
$ /sbin/lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
01:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 10)
18:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
18:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
18:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13)
18:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
19:03.0 Fibre Channel: LSI Logic / Symbios Logic FC949X Fibre Channel Adapter (rev 01)
1a:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
1a:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
- - - - - - - - - - - - - - - - - - - - - - - - -
Steve White +49(331)7499-202
e-Science / AstroGrid-D Zi. 35 Bg. 20
- - - - - - - - - - - - - - - - - - - - - - - - -
Astrophysikalisches Institut Potsdam (AIP)
An der Sternwarte 16, D-14482 Potsdam
Vorstand: Prof. Dr. Matthias Steinmetz, Peter A. Stolz
Stiftung privaten Rechts, Stiftungsverzeichnis Brandenburg: III/7-71-026
- - - - - - - - - - - - - - - - - - - - - - - - -
|
|
|