Subject: | |
From: | |
Reply To: | |
Date: | Thu, 3 Jan 2008 15:55:46 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ken Teh wrote:
> I just installed a 4.5 machine and it hangs when booting at "grub
> loading stage 2". Here's the strange part. It hangs only when a SCSI
> disk (LVD/SE) disk is attached. SCSI card is an Adaptec 29160. When
> the disk is removed, it rips right through the boot. The disk is fine
> because I use the 4.5 install disk in rescue mode and I can see the
> disk, mount it, and all its data is there. I tried with another disk
> and I have the exact same result. I'm baffled!!
>
> Ken
The odd's are that it's because the disks are getting re-ordered when you plug
in and unplug the scsi disks.
Without any disks there, grub is saying "here is my disk on (hd0,0) and away I
go" And since hd0,0 is the right disk, away it goes.
With the other disks there grub is saying "Well, I have two disks, (hd0,0) and
(hd1,0). I'm told I need to boot off (hd0,0) and away I go" But, in reality,
your main system disk is what grub thinks is (hd1,0) and so it's booting off
the wrong disk.
Troy
--
__________________________________________________
Troy Dawson [log in to unmask] (630)840-6468
Fermilab ComputingDivision/LCSI/CSI DSS Group
__________________________________________________
|
|
|