Scientific Linux Release 309 on x86_64 is now available. This will be
the last of the 30x series.
-Connie Sieh
-Troy Dawson
-------------------------------------------------------------------------
Scientific Linux Release 309 on x86_64 October 12, 2007
This is Scientific Linux.
Please read this entire document before installing.
This is based on the rebuilding of RPMS out of SRPMS's from Enterprise 3 AS
*including Update 9.
Please send bug reports and suggestions to [log in to unmask]
--------------------------------------------------------------------------
Table of contents
DOWNLOAD INFO
ADDED compared to Enterprise 3
UPDATED compared to Enterprise 3
Installer modifications
Site Info
/contrib
/notsupported
SRPMS
MISC Notes
HARDWARE SPECIFIC ISSUES
SOFTWARE ISSUES/BUGS
INFO
HARDWARE REQUIREMENTS
ERRATA
_____________________________________________________________________________
DOWNLOAD INFO
_____________________________________________________________________________
ftp://ftp.scientificlinux.org/linux/scientific/309/x86_64/
anon rsync access available .
-----------------------------------------------------------------------------
ADDED compared to 3
-----------------------------------------------------------------------------
From Cluster Suite
* clumanager-1.2.35.2-1.x86_64.rpm
piranha-0.7.11-1.1.x86_64.rpm
redhat-config-cluster-1.0.8-1.noarch.rpm
ipvsadm-1.21-9.ipvs108.x86_64.rpm
From Developer Suite
eclipse-2.1.2-8.x86_64.rpm
eclipse-lomboz-2.1.2-8.i386.rpm
eclipse-rhaps-develserver-2.1.2-8.i386.rpm
Firefox and Thunderbird
* Firefox and Thunderbird are not included anymore.
GFS
* GFS-6.0.2.36-5.ia32e.rpm
* GFS-6.0.2.36-5.x86_64.rpm
* GFS-devel-6.0.2.36-5.ia32e.rpm
* GFS-devel-6.0.2.36-5.x86_64.rpm
* GFS-modules-6.0.2.36-5.ia32e.rpm
* GFS-modules-6.0.2.36-5.x86_64.rpm
* GFS-modules-smp-6.0.2.36-5.x86_64.rpm
Korn shell from ATT
ksh93-2000.10.31.0-1.i386.rpm
mpg321, xmms-mp3, libmad, libid3tag
Because of licensing reasons RedHat did not include MP3 support
in their distribution. While this does not fill all cases, this
does allow some of the more popular music players to use mp3's.
libmad and libid3tag were added for dependancy reasons.
mpg321-0.2.10-4.fr.x86_64.rpm
xmms-mp3-1.2.7-2.x86_64.rpm
libmad-0.15.1b-1.fr.x86_64.rpm
libmad-devel-0.15.1b-1.fr.x86_64.rpm
libid3tag-0.15.1b-1.fr.x86_64.rpm
libid3tag-devel-0.15.1b-1.fr.x86_64.rpm
IceWM
A small and fast window manager. Good for slower systems or
systems with not much memory. It is put it in the graphical login's
session list if installed.
icewm-1.2.20-2.x86_64.rpm
icewm-l10n-1.2.20-2.x86_64.rpm
Java
java-1.4.2-sun-compat-1.4.2.12-1jpp.i586.rpm
This package is the java sdk from sun.
It's license is found at misc/licenses/j2sdk-1.4.2-x.license
To have all of it's links (including plugins) setup correctly
you should also install java-1.4.2-sun-compat
So the easiest thing to do is
yum install java-1.4.2-sun-compat
as it will automatically pull in j2sdk-1.4.2_08-fcs.i586.rpm
j2sdk-1.4.2_12-fcs.i586.rpm
This package provides JPackage compatibility symlinks and
directories for Sun's JDK rpm
MISC
Added these rpms because they are important as RedHat removed them.
gv-3.5.8-23.x86_64.rpm from Fedora Core 1
ncurses4-5.0-12.x86_64.rpm from Fedora Core 1
readline41-4.1-17.x86_64.rpm from Fedora Core 1
xcdroast-0.98a14-2.x86_64.rpm from Fedora Core 1
jpilot-0.99.6-1.x86_64.rpm from Fedora Core 1
cdda2wav-2.0-11.x86_64.rpm dependency of xcdroast
Added these rpms because they are useful. These are from CERN.
perl-BSD-Resource-1.24-1.x86_64.rpm
perl-Compress-Zlib-1.16-12.x86_64.rpm
perl-MailTools-1.62-1.noarch.rpm
perl-Parse-RecDescent-1.94-1.noarch.rpm
perl-Pod-Escapes-1.03-1.noarch.rpm
perl-Pod-Simple-2.05-1.noarch.rpm
perl-SQL-Statement-1.06-1.noarch.rpm
perl-TermReadKey-2.20-12.x86_64.rpm
perl-Text-CSV_XS-0.23-1.x86_64.rpm
perl-Text-Template-1.44-1.noarch.rpm
perl-TimeDate-2.22-1.noarch.rpm
perl-Tk-804.027-1.x86_64.rpm
perl-Tk-HistEntry-0.42-1.noarch.rpm
perl-Proc-ProcessTable-0.39-1.x86_64.rpm
The vendor added the following rpms as part of Update 1
elfutils-libelf-devel-0.91-3.x86_64.rpm
jaf-20030319-1.x86_64.rpm
javamail-20031006-1.x86_64.rpm
junit-3.8.1-1.x86_64.rpm
mtx-1.2.18-1.x86_64.rpm
rh-postgresql-pl-7.3.6-1.x86_64.rpm
rh-postgresql-server-7.3.6-1.x86_64.rpm
rh-postgresql-test-7.3.6-1.x86_64.rpm
The vendor added the following rpms as part of Update 2
net-snmp-perl-5.0.9-2.30E.3.x86_64.rpm
imap-utils-2002d-8.x86_64.rpm
java-javadoc-1.5.33-1jpp_4rh.noarch.rpm
jpackage-utils-1.5.33-1jpp_4rh.noarch.rpm
laus-0.1-56RHEL3.x86_64.rpm
laus-devel-0.1-56RHEL3.x86_64.rpm
laus-libs-0.1-56RHEL3.x86_64.rpm
pam_passwdqc-0.7.5-1.x86_64.rpm
php-devel-4.3.2-11.ent.x86_64.rpm
rhgb-0.11.2-4.x86_64.rpm
sg3_utils-1.06-2.x86_64.rpm
The vendor added the following rpms as part of Update 3
anacron-2.3-25.1.x86_64.rpm
qt-config-3.1.2-13.4.x86_64.rpm
amtu-0.1-6RHEL.x86_64.rpm
authd-1.4.1-1.rhel3.x86_64.rpm
bind-libs-9.2.4-EL3_10.x86_64.rpm
bootparamd-0.17-17.x86_64.rpm
crash-3.8-3.x86_64.rpm
diskdumputils-0.4.0-1.x86_64.rpm
eal3-certification-0.7-1.noarch.rpm
eal3-certification-doc-0.7-1.noarch.rpm
libglade-0.17-11.x86_64.rpm
ltrace-0.3.32-3.EL.x86_64.rpm
nss_db-2.2-20.4.x86_64.rpm
openoffice.org-style-gnome-1.1.0-16.9.EL.x86_64.rpm
rpm-libs-4.2.3-10.x86_64.rpm
gtkglarea-1.2.2-16.x86_64.rpm
joe-2.9.8-5.x86_64.rpm
lynx-2.8.5-11.x86_64.rpm
nasm-0.98.35-3.x86_64.rpm
perl-PDL-2.3.4-4.x86_64.rpm
skkdic-20030211-1.noarch.rpm
The vendor added the following rpms. We have had them in
/notsupported/RPMS . So they are really just moving.
And since so many things moved out of /notsupported/RPMS we
decided to move everything that was in /notsupported/RPMS to
the main tree.
alchemist-devel-1.0.27-1.x86_64.rpm
amanda-devel-2.4.4p1-0.3E.x86_64.rpm
beecrypt-devel-3.0.1-0.20030630.x86_64.rpm
db4-java-4.1.25-14.x86_64.rpm
bind-chroot-9.2.4-EL3_10.x86_64.rpm
bind-devel-9.2.4-EL3_10.x86_64.rpm
bogl-devel-0.1.9-27.x86_64.rpm
busybox-0.60.5-8.x86_64.rpm
Canna-devel-3.6-20.x86_64.rpm
cdparanoia-devel-alpha9.8-15.x86_64.rpm
cdrecord-devel-2.01.0.a32-0.EL3.1.x86_64.rpm
dhcp-devel-3.0pl2-6.16.x86_64.rpm
expect-devel-5.38.0-92.2.x86_64.rpm
finger-server-0.17-18.x86_64.rpm
FreeWnn-devel-1.11-36.3.x86_64.rpm
ghostscript-devel-7.05-32.1.8.x86_64.rpm
gimp-devel-1.2.3-20.1.x86_64.rpm
gimp-perl-1.2.3-20.1.x86_64.rpm
gimp-print-devel-4.2.4-5.x86_64.rpm
gnome-pilot-devel-2.0.10-1.x86_64.rpm
gnome-python2-applet-1.99.14-5.x86_64.rpm
gphoto2-devel-2.1.0-7.x86_64.rpm
gstreamer-devel-0.6.0-5.x86_64.rpm
gstreamer-plugins-0.6.0-14.x86_64.rpm
gstreamer-plugins-devel-0.6.0-14.x86_64.rpm
guile-devel-1.6.4-8.x86_64.rpm
ImageMagick-c++-5.5.6-5.1.x86_64.rpm
ImageMagick-c++-devel-5.5.6-5.1.x86_64.rpm
ImageMagick-devel-5.5.6-5.1.x86_64.rpm
ImageMagick-perl-5.5.6-5.1.x86_64.rpm
imap-devel-2002d-9.x86_64.rpm
kdegames-devel-3.1.3-3.2.x86_64.rpm
kdemultimedia-devel-3.1.3-3.1.x86_64.rpm
libgal2-devel-1.99.10-1.x86_64.rpm
libglade-devel-0.17-12.2.x86_64.rpm
libgsf-devel-1.6.0-4.x86_64.rpm
libgtop2-devel-2.0.2-3.x86_64.rpm
libmrproject-devel-0.9-5.x86_64.rpm
libpng10-devel-1.0.13-15.x86_64.rpm
libsoup-devel-1.99.26-1.x86_64.rpm
libtabe-devel-0.2.6-5.1.x86_64.rpm
libwnck-devel-2.2.1-3.x86_64.rpm
libwvstreams-devel-3.70-10.x86_64.rpm
libxml-devel-1.8.17-9.1.x86_64.rpm
mod_perl-devel-1.99_09-10.ent.x86_64.rpm
openh323-devel-1.11.2-4.1E.x86_64.rpm
openssl-perl-0.9.7a-33.12.x86_64.rpm
parted-devel-1.6.3-29.3.x86_64.rpm
perl-suidperl-5.8.0-88.7.x86_64.rpm
pump-devel-0.8.19-1.x86_64.rpm
pwlib-devel-1.4.7-7.EL.x86_64.rpm
pyorbit-devel-1.99.3-5.x86_64.rpm
python-tools-2.2.3-5.x86_64.rpm
qt-ODBC-3.1.2-13.4.x86_64.rpm
samba-swat-3.0.6-2.3E.x86_64.rpm
sendmail-devel-8.12.11-4.RHEL3.1.x86_64.rpm
sox-devel-12.17.4-4.3.x86_64.rpm
tcl-devel-8.3.5-92.2.x86_64.rpm
VFlib2-devel-2.25.6-17.x86_64.rpm
w3c-libwww-devel-5.4.0-5.x86_64.rpm
Xaw3d-devel-1.5-18.x86_64.rpm
XFree86-sdk-4.3.0-68.EL.x86_64.rpm
xmms-devel-1.2.7-22.1.p.x86_64.rpm
up2date-update-4.2.38-1.x86_64.rpm
The vendor added the following rpms as part of Update 4
aspell-config-0.33.7.1-25.1.x86_64.rpm
iscsi-initiator-utils-3.6.2-4.x86_64.rpm
mailman-2.1.5-23.x86_64.rpm
mikmod-devel-3.1.6-21.2.x86_64.rpm
sysstat-5.0.5-5.rhel3.x86_64.rpm
vim-X11-6.3.029-1.30E.3.x86_64.rpm
net-snmp-libs-5.0.9-2.30E.12.x86_64.rpm
perl-Crypt-SSLeay-0.51-4.x86_64.rpm
alchemist-1.0.27-1.i386.rpm
arts-1.1.3-2.3.i386.rpm
aspell-0.33.7.1-25.1.i386.rpm
audiofile-0.2.3-7.1.i386.rpm
beecrypt-3.0.1-0.20030630.i386.rpm
blas-3.0-20.i386.rpm
bogl-0.1.9-27.i386.rpm
bzip2-libs-1.0.2-11.i386.rpm
Canna-libs-3.6-20.i386.rpm
cdparanoia-libs-alpha9.8-15.i386.rpm
compat-db-4.0.14-5.1.i386.rpm
compat-pwdb-0.62-3.i386.rpm
curl-7.10.6-4.2.i386.rpm
e2fsprogs-1.32-15.1.i386.rpm
elfutils-0.91-3.i386.rpm
esound-0.2.28-6.i386.rpm
fam-2.6.8-15.i386.rpm
FreeWnn-libs-1.11-36.3.i386.rpm
gail-1.2.2-1.i386.rpm
GConf2-2.2.1-4.i386.rpm
gd-1.8.4-12.3.1.i386.rpm
gdk-pixbuf-0.22.0-11.3.3.i386.rpm
ghostscript-7.05-32.1.9.i386.rpm
gimp-print-4.2.4-5.1.i386.rpm
gmp-4.1.2-5.i386.rpm
gtk+-1.2.10-31.i386.rpm
gtk-engines-0.12-2.0.i386.rpm
gtkglarea-1.2.2-16.i386.rpm
gtkhtml2-2.2.0-6.i386.rpm
guile-1.6.4-8.30.1.i386.rpm
hesiod-3.0.2-28.1.i386.rpm
ImageMagick-5.5.6-7.i386.rpm
ImageMagick-c++-5.5.6-7.i386.rpm
imlib-1.9.13-13.4.i386.rpm
kdebase-3.1.3-5.5.i386.rpm
kdelibs-3.1.3-6.6.i386.rpm
kdemultimedia-3.1.3-3.1.i386.rpm
lapack-3.0-20.i386.rpm
laus-libs-0.1-66RHEL3.i386.rpm
libaio-0.3.96-5.i386.rpm
libao-0.8.3-3.1.i386.rpm
libdbi-0.6.5-5.i386.rpm
libghttp-1.0.9-8.1.i386.rpm
libglade2-2.0.1-3.i386.rpm
libgnomecanvas-2.2.0.2-2.i386.rpm
libgnomeprint22-2.2.1.3-5.i386.rpm
libgnomeprintui22-2.2.1.3-2.0.i386.rpm
libgtop2-2.0.2-3.i386.rpm
libIDL-0.8.0-9.i386.rpm
libmng-1.0.4-3.i386.rpm
libogg-1.0-5.1.i386.rpm
libpcap-0.7.2-7.E3.2.i386.rpm
libpng10-1.0.13-15.i386.rpm
libsoup-1.99.26-1.i386.rpm
libtabe-0.2.6-6.EL.i386.rpm
libtool-libs-1.4.3-6.i386.rpm
libungif-4.1.0-15.i386.rpm
libusb-0.1.6-3.i386.rpm
libuser-0.51.7-1.EL3.3.i386.rpm
libvorbis-1.0-7.i386.rpm
libwvstreams-3.70-10.i386.rpm
libxml-1.8.17-9.2.i386.rpm
linc-1.0.3-1.i386.rpm
lm_sensors-2.6.5-6.i386.rpm
lockdev-1.0.1-1.2.i386.rpm
mikmod-3.1.6-21.2.i386.rpm
netpbm-9.24-11.30.1.i386.rpm
net-snmp-libs-5.0.9-2.30E.12.i386.rpm
newt-0.51.5-1.i386.rpm
openh323-1.11.2-4.1E.i386.rpm
openjade-1.3.1-12.1.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
ORBit2-2.6.2-1.i386.rpm
pcre-3.9-10.1.i386.rpm
perl-5.8.0-88.9.i386.rpm
pilot-link-0.11.7-1.1.i386.rpm
pspell-0.12.2-16.1.i386.rpm
pwlib-1.4.7-7.EL.i386.rpm
qt-3.1.2-13.4.i386.rpm
rpm-libs-4.2.3-13.i386.rpm
sane-backends-1.0.9-5.7.i386.rpm
scrollkeeper-0.3.11-8E.i386.rpm
SDL-1.2.5-6.i386.rpm
slang-1.4.5-18.i386.rpm
startup-notification-0.5-1.i386.rpm
tcp_wrappers-7.6-34.1.i386.rpm
unixODBC-2.2.8-2.3.0.2.i386.rpm
unixODBC-kde-2.2.8-2.3.0.2.i386.rpm
utempter-0.5.5-1.3EL.0.i386.rpm
VFlib2-2.25.6-17.i386.rpm
vte-0.11.10-11.i386.rpm
w3c-libwww-5.4.0-5.i386.rpm
Xaw3d-1.5-18.i386.rpm
bind-libs-9.2.4-5_EL3.i386.rpm
gphoto2-2.1.0-7.1.i386.rpm
gsl-1.1.1-5.i386.rpm
gstreamer-0.6.0-5f1.i386.rpm
gtk2-2.2.4-12.i386.rpm
krb5-libs-1.2.7-31.i386.rpm
libraw1394-0.9.0-10.RHEL3.i386.rpm
libxml2-2.5.10-7.i386.rpm
libxslt-1.0.33-5.i386.rpm
pam-0.75-62.i386.rpm
pam-devel-0.75-62.i386.rpm
pango-1.2.5-5.i386.rpm
popt-1.8.2-13.i386.rpm
redhat-lsb-1.3-3.1.EL3.i386.rpm
rh-postgresql-libs-7.3.8-2.i386.rpm
ruby-libs-1.6.8-9.EL3.3.i386.rpm
gsl-1.1.1-5.x86_64.rpm
gsl-devel-1.1.1-5.x86_64.rpm
gcc-gnat-3.2.3-49.x86_64.rpm
libgnat-3.2.3-49.x86_64.rpm
linuxwacom-0.6.4-7.x86_64.rpm
linuxwacom-devel-0.6.4-7.x86_64.rpm
libgcc-3.2.3-49.i386.rpm
libgcj-3.2.3-49.i386.rpm
libobjc-3.2.3-49.i386.rpm
libstdc++-3.2.3-49.i386.rpm
libf2c-3.2.3-49.i386.rpm
libgnat-3.2.3-49.i386.rpm
cyrus-sasl-gssapi-2.1.15-10.i386.rpm
cyrus-sasl-md5-2.1.15-10.i386.rpm
cyrus-sasl-plain-2.1.15-10.i386.rpm
gdb-6.1post-1.20040607.52.i386.rpm
redhat-artwork-0.73.2-1.SL.i386.rpm
The vendor added the following rpms as part of Update 5
bonobo-activation-2.2.2-1.i386.rpm
gnome-vfs2-2.2.5-2E.1.i386.rpm
libbonobo-2.2.3-1.i386.rpm
cscope-15.5-9.RHEL3.x86_64.rpm
diskdumputils-1.0.1-4.x86_64.rpm
jfbterm-0.4.7-1.EL3.1.x86_64.rpm
pstack-1.2-3.EL.2.x86_64.rpm
pine
Change location of pine.conf from /usr/local/ to /etc
pine-4.58-3.SL.x86_64.rpm
rhgb
Remove "Red Hat" from rpm.
rhgb-0.11.2-5.SL.x86_64.rpm
Yum -- From Duke University
yum-2.0.7-12.SL.noarch.rpm
yum-2.0.7-12 fixes a issue with ftp on the Bluearc NAS server
yum-2.0.7-8 allows for the updating of ia32e rpms.
yum-2.0.7-9 fixed kernel-module hangups, as well as installs
kernel-modules for multiple kernels
yum-2.0.7-7 allows for the kernel-module-<package> naming convention
yum 2.0.7 contains minor bug fixes along with the feauture
of yum [action] package.somearch support added for
erase/remove, install, update and upgrade
* yum-conf-309-1.SL.noarch.rpm
* yum-conf-3x-1-1.SL.noarch.rpm
* yum.cron now uses /etc/yum.conf for a template for it's configuration
* file. If /etc/yum.conf has an excludes line, it will append the
* excludes in /etc/yum.d/yum.cron.excludes. If /etc/yum.conf
* does not have an excludes line, it will add the one from
* /etc/yum.d/yum.cron.excludes
* yum-conf-3x was created for those users who want to be at the latest
* stable release. It is always pointing at the 3x area.
yum.cron now checks to see how long the machine is been up
If it is up less than 20 hours, it doesn't wait, but does the
update. This uptime check was done to help laptops and other
machines that might not be on long enough to wait for the
random time.
There is a fastbug repo area to correspond to the vendors fasttrack
This is not on by default.
bugfix-308 - reserved for packages from the next Update
This is not on by default
Removed nonsupported since these were merged with main rpm's
Changed main server to ftp.scientificlinux.org
Made it easier for users to change where their repository is.
For yum.cron you now only have to change the files
/etc/yum.d/yum.cron.primary and/or yum.cron.secondary
You can add multiple repository in either file, or leave either blank.
The servers in primary will be used in the order they are in the
file. The servers in secondary will be used randomly. So if you
are concerned about overloading your one server, leave the primary
blank, and list all your servers in secondary, where they will
be used randomly
Fixed the names on yum.conf as well.
now uses new feature "tolerant=1" for yum.cron
openafs
* openafs-1.2.13-15.17.SL.x86_64.rpm
* openafs-client-1.2.13-15.17.SL.x86_64.rpm
* openafs-compat-1.2.13-15.17.SL.x86_64.rpm
* openafs-debug-1.2.13-15.17.SL.x86_64.rpm
* openafs-devel-1.2.13-15.17.SL.x86_64.rpm
* openafs-kernel-source-1.2.13-15.17.SL.x86_64.rpm
* openafs-kpasswd-1.2.13-15.17.SL.x86_64.rpm
* openafs-krb5-1.2.13-15.17.SL.x86_64.rpm
* openafs-server-1.2.13-15.17.SL.x86_64.rpm
* kernel-module-openafs-2.4.21-52.EL-1.2.13-15.17.SL.ia32e.rpm
* kernel-module-openafs-2.4.21-52.EL-1.2.13-15.17.SL.x86_64.rpm
* kernel-module-openafs-2.4.21-52.ELsmp-1.2.13-15.17.SL.x86_64.rpm
OpenAFS was updated to version 1.2.13 to fix various bugs.
rpm spec file by Stephan Wiesand
x86_64 aklog fix - Enrico M.V. Fasanelli put in Chris Wing's patch
These are not installed by default.
openafs-firstboot-1.2.11-5.SL.noarch.rpm
The openafs-firstboot rpm enables "firstboot" to ask about
what AFS cell you want and if you want afs started at boot.
SL_afs_no_dynroot-1.0-1.noarch.rpm
This package removes the -dynroot option from the openafs config
Restarting of afs is needed for this to take effect.
This rpm does not restart afs
SL_desktop_tweeks-1.1-1.x86_64.rpm
This adds a terminal and mozilla icon to the kicker panel for
both KDE and GNOME. Installed by default for both KDE and GNOME.
SL_enable_serialconsole
This script makes all the changes necessary to send
console output to both the serial port and the screen. This
also creates a login prompt on the serial port and allows users
to login at this prompt.
Bug with the default serial number and dealing with a /boot
partition were fixed in version 3.1.
SL_enable_serialconsole-3.1-3.noarch.rpm
SL_firefox_parentlock_fix-1.0-10.noarch.rpm
When a users home area is in AFS space, it is possible for
firefox, thunderbird, and/or seamonkey to leave a lock file called
.parentlock when they are closed. The user is then not able to
restart their problem until that lock file is removed.
This puts in a startup script that cleans up that file.
SL_inittab_change-1.0-5.x86_64.rpm
Changes /etc/inittab to require the root password for
single user mode. Not installed by default.
SL_libg2c.a_change-3.2.3-2.noarch.rpm
Creates a missing symbolic link in the gcc-g77 package from
/usr/lib/libg2c.a
to /usr/lib/gcc-lib/$arch-redhat-linux/3.2.3/libg2c.a
SL_no_colorls-1.0-1.x86_64.rpm
Turns off "color" of ls. Not installed by default.
SL_rpm_show_arch-1.0-1.noarch.rpm
Adds arch to "rpm -qa" listing.
SL_sendmail_accept-1.0-2.x86_64.rpm
Changes Sendmail config so that it allows incomming mail.
Not installed by default.
SL_startkde_afs-1.0-1.i386.rpm
SL_startkde_afs-1.0-1.i386.rpm
By default startkde checks to make sure that a users home area has
at least 25K of disk space. A bug in the openafs kernel module for
the enterprise kernel causes single cpu machines to only list 1 K of
space. This changes the check to only need 1 K of space. The check
to make sure kde can actually write to the users home area is still
intact.
SL_startgnome_afs-1.1-1.noarch.rpm
Enables gnome to work better in a afs envirnonment.
It closes processes left open by gnome after the user has logged out
since these processes will not be able to touch the users home
directory anymore.
It creates lock files in a local temporary directory. This can
allow multiple versions of gnome to run, but it prevents AFS corruption.
SL_thunderbird_url_handlers-1-1.noarch.rpm
Set the URL settings in seamonkey,thunderbird to point to firefox
SL_tweek_pagecache-1.0-1.noarch.rpm
Modifies the /proc/sys/vm/pagecache settings. This has been shown
Changes the values from "1 15 100" to "1 5 15"
to make the kernel use less memory on desktop systems for buffer cache.
Not installed by default.
Documentation
Documentation in /sites/example/build/documentation on how to
make new "sites" including scripts to create site iso images.
These are Update 2 versions
rhel-ig-x8664-multi-en-3-3.noarch.rpm
rhel-isa-en-3-3.noarch.rpm
rhel-rg-en-3-3.noarch.rpm
rhel-sag-en-3-3.noarch.rpm
rhel-sg-en-3-3.noarch.rpm
rhel-devtools-en-3-1.noarch.rpm
rhel-cs-en-3-3.noarch.rpm
apt-get
Yum will do the auto update function by default.
Note that apt is not multi-arch enabled. So since this x86_64
release is multi-arch then apt should not be used.
Yum is installed by default and apt is not because of the multi-arch
issue.
apt-0.5.15cnc6-4.SL.x86_64.rpm
apt-devel-0.5.15cnc6-4.SL.x86_64.rpm
* apt-sourceslist-309-1.SL.x86_64.rpm
apt-autoupdate-1-5.SL.noarch.rpm
apt-firstboot-1-5.SL.noarch.rpm
apt-scripts-1-5.SL.noarch.rpm
synaptic-0.52-1.x86_64.rpm
---------------------------------------------------------------------------
UPDATED compared to 3
----------------------------------------------------------------------------
KERNEL
Latest errata kernel .
Note the "unsupported" kernel rpms. These contain modules that
are not in the "default kernel rpms".
RedHat EULA required changes
RedHat requires that the following rpms be changed as part of
their EULA (End User License Agreement)
anaconda-images
redhat-artwork
redhat-logos
anaconda-help
indexhtml
sl-release and redhat-lsb were changed to make S.L. lsb compliant
sl-release now includes the SL.releasenote
* sl-release now has the default bookmarks for seamonkey
* sl-release-3.0.9-7.9.noarch.rpm
* redhat-lsb-1.3-3.1.SL.309.i386.rpm
* redhat-lsb-1.3-3.1.SL.309.x86_64.rpm
Http/apache
*
* Changed the default html web page to contain SL info vs TUV
*
* httpd-2.0.46-68.sl3.x86_64.rpm
* httpd-devel-2.0.46-68.sl3.x86_64.rpm
* mod_ssl-2.0.46-68.sl3.x86_64.rpm
mozilla/seamonkey
We added the i386 version because many plugins are not available
for 64bit.
* The default bookmarks are now changed in sl-release, so we are
* able to use the generic seamonkey rpm's.
Fixes to misc RPMS
Added "Requires" of coreutils so that it will install during the install
gstreamer-0.6.0-5f1.x86_64.rpm
gstreamer-tools-0.6.0-5f1.x86_64.rpm
Added "Requires" of tetex-afm so that it will be able to print after
install. It was missing fonts provided in tetex-afm.
a2ps-4.13b-28_SL.x86_64.rpm
firstboot-1.1.33-1SL.noarch.rpm
Removed the additional_cds.py module
findutils-4.1.7-9.2.SL.x86_64.rpm
Patch to allow building on systems with afs
----------------------------------------------------------------------------
Installer modifications
---------------------------------------------------------------------------
Anaconda (installer)
* anaconda-9.1.6.20-4.SL.x86_64.rpm
* anaconda-runtime-9.1.6.20-4.SL.x86_64.rpm
* Updated to Update 9 code
Fixed genhdlist bug with no --ignorefile bug # 58
Reverted back to my patch for rpm on cd ordering.
Excluded the following RPMS from the "Everything" install
GFS was excluded as it needs configuration to not complain
ksh93 is excluded because it has some of the same files as pdksh
up2date* is excluded as it causes firstboot to not work
rhn-applet has a dependency on up2date
*openafs* because it needs configuration and it has kernel modules
Install kernel*-unsupported by default. It does not conflict with
other kernel rpms as it installs into into it's own directory
Note that it just contains kernel-modules.
Fixed a bug that RedHat introduced in loader2/method.c which broke
specifying the install method on the command line.
Added code to support "site" customizations which include
Custom installer kernel(needs nptl)
Custom installer(anaconda) including graphics
Added RPMS
ability to select packages to install by default via "comps.xml"
Modified/replaced RPMS (ability to upgrade or downgrade version)
see /sites
Made a "Packages added to SL" group so that you could select
any of these added RPMS during the install
anaconda-help-9.1-3.SL.noarch.rpm
Changed to reflect SL vs redhat.
Included "generic" installer graphics
RedHat requires us as part of their "EULA" that we replace
the images in "anaconda-images" with our own.
anaconda-images
---------------------------------------------------------------------------
Site Info
---------------------------------------------------------------------------
/sites/example/
README Now just says to read docs in /sites/example/documentation
build/documentation/
README Describes files and directories in /sites/example/
README.steps Step by step of what is needed to make a new site
README.images Info on how to change the graphics used during the install
/sites/example/build/scripts/
transform.sh Script that does all the steps of
README.steps except the original copying
of the example tree over to the new site
make.site.from.release.sh Script that will take a Enterprise 3 tree
and make a site out of it. Tested with
cel3(CERN) and Fermi Linux . Called by
make.new.site.sh
make.new.site.sh Script that will take either a Enterprise 3 tree
or the example site and make a site out of it.
---------------------------------------------------------------------------
/contrib/
---------------------------------------------------------------------------
The packges in this section have been contributed by various people. They
are presented AS IS and there is no guarantee of them working. These packages
are NOT supported by us. They will only get security updates if the
contributor provides them. If you have questions about them then ask the
contributor.
There are some rules to follow to be able to contribute to this area. These
rules might adjust some.
1- Contract Troy Dawson <[log in to unmask]> with the rpm's that you wish to
contribute. If Troy doesn't personally know you, be prepared with some some
way to show him that you can be trusted. He is a nice guy but
he also is very concerned that this contrib section doesn't get abused.
2- The contributed rpm's must be able to go into a standard Scientific
Linux 3.0.1 release without any extra outside rpms. If extra rpm's are
required, they must be supplied. All extra rpm's supplied must meet the
same criteria as the main rpm's.
3- For each rpm, the source rpm (src.rpm) must be provided.
4- For each source rpm, you must provide where you got it.
5- Both rpm's and srpm's must be digitally signed.
6- Rpms must be freely distributable.
We understand this sounds like alot of work, but once you do it once, it
becomes much easier.
RPMS/
---------------------------------------------------------------------------
/notsupported/RPMS/
---------------------------------------------------------------------------
Moved over to main tree. Directory does not exist any more.
---------------------------------------------------------------------------
/../SRPMS/
---------------------------------------------------------------------------
/
Contains the SRPMS for what we added or changed.
/vendor/
/errata
SRPMS from vendor for errata.
/original
SRPMS from vendor for originally released Enterpise 3 .
/sites/<sites>/SRPMS
SRPMS for site
---------------------------------------------------------------------------
MISC NOTES
---------------------------------------------------------------------------
Upgrades from prior versions.
UPDATES are NOT supported for all versions of SL . This is NOT
something that we changed. Future releases may support upgrading
from SL 3.0.1 to future version of SL 3.0.x.
UPDATES will NOT work from anything except RedHat AS 2.1.
---------------------------------------------------------------------------
HARDWARE SPECIFIC ISSUES
---------------------------------------------------------------------------
ATI 9600/9700/9800 Video card
The version of X included here does NOT support these video cards very
well. If you have one of these cards then you should do a text install
and at the "X" screen select "vesa". This should be enough to get
installed. You can either stay with the "vesa" driver or download and
install the "X" driver from www.ati.com . See
http://www.ati.com/support/drivers/linux/radeon-linux.html
See http://bugzilla.redhat.com bug id 111948
Nvidia Nforce(motherboard chipset) drivers
IDE is supported. NO SUPPORT for ethernet, audio, sata. See
www.nvidia.com for drivers. There may be "open" drivers for some
of these devices. Use google to find them. These are NOT included
here. Because of this Nvidia based motherboard are NOT recommended.
There are also issues with apic/acpi that can make the system unstable
or not boot.
Ethernet devices based on
"Marvell Technology Group Ltd. Yakou Gigabit Ethernet 10/100/1000Base-T
Adapter" do not work out of the box. A driver is available from
http://www.marvell.com
Intel 965 based motherboards
Intel does not include a PATA(IDE) controller on the 965 chipset.
Most motherboard vendors are including a PATA(IDE) controller but
some are not compatible with the 308 kernel. You can try the
"all-generic-ide" kernel boot option. It has worked with some
pata controllers.
Some motherboard vendors are using a non intel sata controller
that is not compatible with the 308 kernel.
Some motherboard vendors are using a non intel ethernet controller
that is not compatible with the 308 kernel.
So research this issue before buying a Intel 965 based
motherboard.
---------------------------------------------------------------------------
SOFTWARE ISSUES/BUGS
---------------------------------------------------------------------------
sgi_fam with tcpwrappers(/etc/hosts.deny)
Error messages /var/log/secure such as
Jan 22 12:33:33 systemname xinetd[25122]: FAIL: sgi_fam libwrap
from=<no address>
Jan 22 12:33:33 systemname xinetd[3819]: START: sgi_fam pid=25123
from=<no address>Jan 22 12:33:33 systemname xinetd[25123]: FAIL:
sgi_fam libwrap from=<no address>
Only solution so far is to change /etc/hosts.allow to allow sgi_fam
with
fam: ALL
This could be a security risk so you must decide.
redhat-config-packages
This rpm only installs packages via cdrom. It is not useful.
It does NOT work so do NOT try to use it. Use yum instead.
It is useful. It is only included here because rpms have dependencies
on it and I do not want to change those to remove the dependencies.
/usr/X11R6/lib
The "final link" to each of the libraries is missing.
Should be
libX11.so.6.2 <- libX11.so.6 <- libX11.so
But is
libX11.so.6.2 <- libX11.so.6
Solution is to install Xfree86-devel. This rpm will make the
missing links.
---------------------------------------------------------------------------
INFO
---------------------------------------------------------------------------
Web Site
http://www.scientificlinux.org
FTP
ftp://ftp.scientificlinux.org/linux/scientific/309/
Mailing Lists
[log in to unmask] Development of Scientific Linux
[log in to unmask] Users of Scientific Linux supporting
each other
[log in to unmask] Announcements concerning Scientific Linux
[log in to unmask] Announcements concerning Security Errata
_____________________________________________________________________________
ERRATA included - rebuilt from SRPMS
/errata/SL/RPMS/
---------------------------------------------------------------------------
* gimp-1.2.3-20.9.el3.x86_64.rpm
* gimp-devel-1.2.3-20.9.el3.x86_64.rpm
* gimp-perl-1.2.3-20.9.el3.x86_64.rpm
* kernel-2.4.21-52.EL.ia32e.rpm
* kernel-2.4.21-52.EL.x86_64.rpm
* kernel-doc-2.4.21-52.EL.x86_64.rpm
* kernel-smp-2.4.21-52.EL.x86_64.rpm
* kernel-smp-unsupported-2.4.21-52.EL.x86_64.rpm
* kernel-source-2.4.21-52.EL.x86_64.rpm
* kernel-unsupported-2.4.21-52.EL.ia32e.rpm
* kernel-unsupported-2.4.21-52.EL.x86_64.rpm
* php-4.3.2-43.ent.x86_64.rpm
* php-devel-4.3.2-43.ent.x86_64.rpm
* php-imap-4.3.2-43.ent.x86_64.rpm
* php-ldap-4.3.2-43.ent.x86_64.rpm
* php-mysql-4.3.2-43.ent.x86_64.rpm
* php-odbc-4.3.2-43.ent.x86_64.rpm
* php-pgsql-4.3.2-43.ent.x86_64.rpm
* yum-conf-309-1.SL.noarch.rpm
* bind-9.2.4-21.el3.x86_64.rpm
* bind-chroot-9.2.4-21.el3.x86_64.rpm
* bind-devel-9.2.4-21.el3.x86_64.rpm
* bind-libs-9.2.4-21.el3.x86_64.rpm
* bind-utils-9.2.4-21.el3.x86_64.rpm
* cups-1.1.17-13.3.45.x86_64.rpm
* cups-devel-1.1.17-13.3.45.x86_64.rpm
* cups-libs-1.1.17-13.3.45.i386.rpm
* cups-libs-1.1.17-13.3.45.x86_64.rpm
* cyrus-sasl-2.1.15-15.i386.rpm
* cyrus-sasl-2.1.15-15.x86_64.rpm
* cyrus-sasl-devel-2.1.15-15.x86_64.rpm
* cyrus-sasl-gssapi-2.1.15-15.i386.rpm
* cyrus-sasl-gssapi-2.1.15-15.x86_64.rpm
* cyrus-sasl-md5-2.1.15-15.i386.rpm
* cyrus-sasl-md5-2.1.15-15.x86_64.rpm
* cyrus-sasl-plain-2.1.15-15.i386.rpm
* cyrus-sasl-plain-2.1.15-15.x86_64.rpm
* glibc-2.3.2-95.50.i686.rpm
* glibc-2.3.2-95.50.x86_64.rpm
* glibc-common-2.3.2-95.50.x86_64.rpm
* glibc-debug-2.3.2-95.50.x86_64.rpm
* glibc-devel-2.3.2-95.50.i386.rpm
* glibc-devel-2.3.2-95.50.x86_64.rpm
* glibc-headers-2.3.2-95.50.x86_64.rpm
* glibc-profile-2.3.2-95.50.x86_64.rpm
* glibc-utils-2.3.2-95.50.x86_64.rpm
* httpd-2.0.46-68.sl3.x86_64.rpm
* httpd-devel-2.0.46-68.sl3.x86_64.rpm
* mod_ssl-2.0.46-68.sl3.x86_64.rpm
* kernel-2.4.21-51.EL.ia32e.rpm
* kernel-2.4.21-51.EL.x86_64.rpm
* kernel-doc-2.4.21-51.EL.x86_64.rpm
* kernel-module-openafs-2.4.21-51.EL-1.2.13-15.17.SL.ia32e.rpm
* kernel-module-openafs-2.4.21-51.EL-1.2.13-15.17.SL.x86_64.rpm
* kernel-module-openafs-2.4.21-51.ELsmp-1.2.13-15.17.SL.x86_64.rpm
* kernel-smp-2.4.21-51.EL.x86_64.rpm
* kernel-smp-unsupported-2.4.21-51.EL.x86_64.rpm
* kernel-source-2.4.21-51.EL.x86_64.rpm
* kernel-unsupported-2.4.21-51.EL.ia32e.rpm
* kernel-unsupported-2.4.21-51.EL.x86_64.rpm
* libvorbis-1.0-8.el3.i386.rpm
* libvorbis-1.0-8.el3.x86_64.rpm
* libvorbis-devel-1.0-8.el3.x86_64.rpm
* nptl-devel-2.3.2-95.50.x86_64.rpm
* nscd-2.3.2-95.50.x86_64.rpm
* openoffice.org-1.1.2-40.2.0.EL3.i386.rpm
* openoffice.org-i18n-1.1.2-40.2.0.EL3.i386.rpm
* openoffice.org-libs-1.1.2-40.2.0.EL3.i386.rpm
* perl-Net-DNS-0.31-4.el3.noarch.rpm
* qt-3.1.2-17.RHEL3.i386.rpm
* qt-3.1.2-17.RHEL3.x86_64.rpm
* qt-config-3.1.2-17.RHEL3.x86_64.rpm
* qt-designer-3.1.2-17.RHEL3.x86_64.rpm
* qt-devel-3.1.2-17.RHEL3.x86_64.rpm
* qt-MySQL-3.1.2-17.RHEL3.x86_64.rpm
* qt-ODBC-3.1.2-17.RHEL3.x86_64.rpm
* qt-PostgreSQL-3.1.2-17.RHEL3.x86_64.rpm
* seamonkey-1.0.9-0.3.SL3.i386.rpm
* seamonkey-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-chat-1.0.9-0.3.SL3.i386.rpm
* seamonkey-chat-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-devel-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-dom-inspector-1.0.9-0.3.SL3.i386.rpm
* seamonkey-dom-inspector-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-js-debugger-1.0.9-0.3.SL3.i386.rpm
* seamonkey-js-debugger-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-mail-1.0.9-0.3.SL3.i386.rpm
* seamonkey-mail-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-nspr-1.0.9-0.3.SL3.i386.rpm
* seamonkey-nspr-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-nspr-devel-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-nss-1.0.9-0.3.SL3.i386.rpm
* seamonkey-nss-1.0.9-0.3.SL3.x86_64.rpm
* seamonkey-nss-devel-1.0.9-0.3.SL3.x86_64.rpm
* squid-2.5.STABLE3-7.3E.x86_64.rpm
* star-1.5a08-5.x86_64.rpm
* tetex-1.0.7-67.10.x86_64.rpm
* tetex-afm-1.0.7-67.10.x86_64.rpm
* tetex-doc-1.0.7-67.10.x86_64.rpm
* tetex-dvips-1.0.7-67.10.x86_64.rpm
* tetex-fonts-1.0.7-67.10.x86_64.rpm
* tetex-latex-1.0.7-67.10.x86_64.rpm
* tetex-xdvi-1.0.7-67.10.x86_64.rpm
* vsftpd-1.2.1-3E.14.x86_64.rpm
* xpdf-2.02-10.RHEL3.x86_64.rpm
|
