Eva,

How long does it run before the "hang" appears?

-Connie Sieh
On Fri, 2 Feb 2007, Eva 
Myers wrote:

>>> I'm having some trouble installing SL44 on a new machine from World of
>>> Computers.  As far as WOC are aware, the only difference between this
>>> machine and the one I was asking about in December is that the IDE
>>> DVD-RW drive has been replaced by a SATA drive because they were
>>> having difficulty getting a different version of Linux to communicate
>>> with the IDE drive.
>>>
>> It is not the hard drive which is the problem, it is your SATA controller.
>> By any chance can you try to boot if from a (recent!) Knoppix live CD,
>> and run 'lspci' for us?
>
> The output of lspci follows:
>
> 00:00.0 Host bridge: Intel Corporation P965/G965 Memory Controller Hub (rev 02)
> 00:01.0 PCI bridge: Intel Corporation P965/G965 PCI Express Root Port (rev 02)
> 00:03.0 Communication controller: Intel Corporation P965/G965 HECI Controller (rev 02)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
> 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
> 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
> 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
> 03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
> 07:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
> 07:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
>
>
> This is more or less identical to the output of lspci on the older
> machine that froze during the install process unless you used the
> option pci=nommconf.
>
> barbu 14:52% diff osmosis-lspci shanghai-lspci
> 25,26c25,26
> < 03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
> < 07:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
> ---
>> 03:00.0 IDE interface: Marvell Technology Group Ltd.: Unknown device 6101 (rev b1)
>> 07:01.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
>
> (osmosis is the new one, shanghai is the old one.)
> Eva.
>