Subject: | |
From: | |
Reply To: | |
Date: | Sun, 8 Jan 2006 17:42:00 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Ioannis,
The one thing that looks problematic is the "UDMA_CRC_Error_Count",
which I've always understood (and successfully treated) as a problem
with the cable. This is not covered by the self-tests (which indicate
that the disk itself is fine). Running a disk test like bonnie from
a rescue disk should normally trigger these errors (and you should see
the count (RAW_VALUE) increase)
Good luck,
Maarten.
Ioannis Vranos wrote:
...
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_ FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0007 113 101 021 Pre-fail
> Always - 1683
> 4 Start_Stop_Count 0x0032 099 099 040 Old_age
> Always - 1891
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
> Always - 0
> 9 Power_On_Hours 0x0032 092 092 000 Old_age
> Always - 5906
> 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
> Always - 0
> 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
> Always - 0
> 12 Power_Cycle_Count 0x0032 099 099 000 Old_age
> Always - 1872
> 194 Temperature_Celsius 0x0022 103 010 000 Old_age
> Always - 40
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0012 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
> Always - 0
> 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age
> Always - 142
> 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
>
>
> That is Pre-fail and Old_age. Is it just old age? :-)
|
|
|