Subject: | |
From: | |
Reply To: | |
Date: | Mon, 21 Nov 2005 09:07:30 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
Here's what I spent my weekend doing at home:
I'm trying to install SL 4.1 (or 4.2 rc2?3, same results) on a system
that is already running Fedora Core 1.
The system has 4 60GB IDE HD's set up as a couple raid 1 arrays for /usr
and /var and a big raid 5 array.
When I run the installer I get errors about DMA timeouts and when it
eventually times out and gets to the partitioning screen, its missing 1
of the drives, and even weirder, the raid1 devices that were on both
that drive and another drive it does see are missing as well.
I though the problem might be the VIA chipset built in the motherboard,
so I switched to a couple ide PCI cards I had lying around. The drives
are currently running off:
IDE interface: CMD Technology Inc PCI0649 (rev 02)
Unknown mass storage controller: Promise Technology, Inc. 20267 (rev 02)
although swapping controllers made no difference in symptoms.
I thought the problem might be following one of the drives, which it
seemed to when swapping things around, however when i tried installing
with the suspect drive removed, which shouldn't matter in this setup, I
got the same symptoms.
I tried running the installer with an ide=nodma option, and that
resulted in a kernel panic where it usually gets the dma errors.
Does this sound familiar to anyone?
-kevin
--
Kevin M. Hill http://home.fnal.gov/~kevinh/
CD/CSS/CSI http://www-csi.fnal.gov/
Fermilab http://www.fnal.gov/
|
|
|