Subject: | |
From: | |
Reply To: | |
Date: | Wed, 20 Jul 2005 14:47:25 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi all.
As we at CERN were not using yum extensively on SL
until now the following escaped my attention:
With current SL 30X yum while trying to upgrade kernel
and assorted modules this is what happens:
[...]
I will do the following:
[install: kernel-smp 2.4.21-32.0.1.EL.cern.x86_64]
[install: kernel-source 2.4.21-32.0.1.EL.cern.x86_64]
[install: kernel 2.4.21-32.0.1.EL.cern.x86_64]
(I've got previous kernel, kernel-smp, kernel-source
AND matching kernel-module-openafs installed)
Apparently changing:
self.setPkgState(name,arch, '')
to:
self.setPkgState(name,arch, 'i')
in /usr/share/yum/nevral.py (line 336)
fixes the behaviour:
[...]
I will do the following:
[install: kernel-module-openafs-2.4.21-32.0.1.EL.cernsmp
1.2.11-15.12.SL.x86_64]
[install: kernel-smp 2.4.21-32.0.1.EL.cern.x86_64]
[install: kernel-module-openafs-2.4.21-32.0.1.EL.cern
1.2.11-15.12.SL.x86_64]
[install: kernel-source 2.4.21-32.0.1.EL.cern.x86_64]
[install: kernel 2.4.21-32.0.1.EL.cern.x86_64]
(yes, kernel-module-XXX packages are built to coexist)
I believe that this is the behaviour expected by users ?
It also seems to me that doing above change would permit
to skip the code just below the mentioned line:
[...]
for (name, arch) in self.NAkeys():
mo = re.match(km_re,name)
if mo:
modname, kv = mo.group(1,2)
if modname in mod_list and kv in
kernel_version_list.keys() and arch == kernel_version_list[kv]:
if self.state(name,arch) != 'u':
self.setPkgState(name,arch, 'u')
log(4, "Upgrading " + name)
[...]
- the standard upgrade ie:
from kernel-module-openafs-KVER-VER1-REL2 to
kernel-module-openafs-KVER-VER2-REL2
is handled by standard yum code.
Best Regards
Jarek
__
-------------------------------------------------------
_ Jaroslaw_Polok ___________________ CERN - IT/ADC/LE _
_ http://home.cern.ch/~jpolok ___ tel_+41_22_767_1834 _
_____________________________________ +41_78_792_0795 _
|
|
|