Hi Michael,

thanks for the pointer. the node is up and running.

vivek

-----Original Message-----
From:	Michael Joy [mailto:[log in to unmask]]
Sent:	Tue 6/7/2005 12:26 PM
To:	Jain, Vivek
Cc:	
Subject:	RE: problems with second disk of SL3.0.3
You can network install from the first cd. If you read the options on the
bootloader when you boot the first cd you can type: linux askmethod

And then you can do a network install.

Michael Joy
HEP - University of Misssissippi
[log in to unmask]

-----Original Message-----
From: Jain, Vivek [mailto:[log in to unmask]] 
Sent: Tuesday, June 07, 2005 10:13 AM
To: 'Michael Joy '
Subject: RE: problems with second disk of SL3.0.3

 hi michael,

don't we need some sort of a operating system on the machine before we can
do this?

vivek

-----Original Message-----
From: Michael Joy
To: Jain, Vivek
Sent: 6/7/2005 11:12 AM
Subject: RE: problems with second disk of SL3.0.3

Have you tried just doing a network install via http or ftp?

-----Original Message-----
From: [log in to unmask]
[mailto:[log in to unmask]] On Behalf Of
Jain,
Vivek
Sent: Tuesday, June 07, 2005 10:11 AM
To: [log in to unmask]
Subject: problems with second disk of SL3.0.3

Hi all,

We are trying to install SL3.0.3 on a machine. We are using the Custom
install setting. After the first CD was read, it asked for the second
one.
For some reason, it keeps complaining that we are not putting in the
correct
CD. We have used CD's burned on two different machines. We checked the
md5sum for the downloaded image - it looks fine. We are checking the
md5sum
of the image as burned on the disk (it's taking some time).

Our CD drive is OK - we just checked it by reading disk1 again.

In any case, is it possible to setup a configuration where we only use
disk
1 for now. We can add in the other packages later (via network, for
instance).

vivek