Hi Yannick, Martin et al,
thanks for your responses. As a stopgap measure, I put the kickstart file
onto a floppy, and now kickstart installs are humming away. The first one
just finished the postinstallation without problems, and there are no
indications of anything being wrong with the NIC.
Lspci identifies those cards as 82541GI/PI: Class 0200: 8086:1076 (rev
05). The servers are Dell 2850s (no, we still prefer opterons ;-).
A Dell 1850 we set up in January has NICs with exactly the same PCI,
and back then kickstart just worked, three out of three times.
I still think the problem is with the installer, and that there's
a good chance that applying the patched pump/anaconda-runtime/netconfig
- if not yet done - might save many SL sites some grief.
Thanks again,
Stephan
On Wed, 20 Apr 2005, Bly, MJ (Martin) wrote:
> Stephan et al,
>
> Not sure this has any bearing on the situation but we had some problems
> with two particular servers with e1000 NICs that refused to talk
> correctly to some new Nortel switches, whereas their identical brethrin
> worked fine. The two NICs have the 82543GC chip and are tagged at the
> PRO/1000T server adapter, the rest were one of the other (older?) 8254X
> chips. The systems are (still) running RedHat 7.2 so the leap is rather
> large to SL 3.
>
> All our other e1000 NICs work fine with SL3.0.X.
>
> Being in a hurry, we didn't investigate, choosing to swap out the cards
> for known good ones. Ideas at the time were that the autonegotiation
> wasn't working but as I say, we didn't persue the problem.
>
> Martin.
>
>> -----Original Message-----
>> From: [log in to unmask]
>> [mailto:[log in to unmask]] On
>> Behalf Of Stephan Wiesand
>> Sent: 20 April 2005 16:26
>> To: [log in to unmask]
>> Subject: 3.0.4 kickstart problem w/ e1000
>>
>>
>> Hi All,
>>
>> I'm having trouble getting kickstart installations going on a
>> couple of
>> servers with intel gigabit NICs.
>>
>> The symptoms match what's described in
>> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=110036
>>
>> Initial network setup works, but after the NIC is brought up for the
>> second time, things just fail. Even the link indicator is
>> off, and the
>> switch doesn't think there's anything connected to the other
>> end of the
>> cable any longer (switches are cisco gear, and we tried
>> different models
>> even running different OSs).
>>
>> A non-kickstart NFS installation works fine (at least up to the point
>> where I see the graphical installer - haven't really done it yet).
>> I can also boot a 3.0.4 rescue system and bring the interface
>> up and down
>> and up again many times in a row without problems.
>>
>> Red Hat issued an erratum
>> http://rhn.redhat.com/errata/RHEA-2004-518.html
>>
>> that's supposed to fix these problems. I wonder: did these
>> fixes make it
>> into what's used during a kickstart installation of SL 3.0.4?
>>
>> Any additional hints are much apreciated.
>>
>>
>> Thanks,
>> Stephan
>>
>> --
>>
>> ----------------------------------------------------
>> | Stephan Wiesand | |
>> | | |
>> | DESY - DV - | phone +49 33762 7 7370 |
>> | Platanenallee 6 | fax +49 33762 7 7216 |
>> | 15738 Zeuthen | |
>> | Germany | |
>> ----------------------------------------------------
>>
>
--
----------------------------------------------------
| Stephan Wiesand | |
| | |
| DESY - DV - | phone +49 33762 7 7370 |
| Platanenallee 6 | fax +49 33762 7 7216 |
| 15738 Zeuthen | |
| Germany | |
----------------------------------------------------
|
