Using rdist would be an easier way to do this if you have rdist on
your systems
rdist-file:
===============================
HOSTS = ( host1 host2
... hostn)
FILES = ( /etc/sysconfig/clock
/etc/localtime )
${FILES} -> ${HOSTS}
install;
=================================
Start from a patched system, you can
rdist -P /usr/bin/ssh -f rdist-file
rdist -P /usr/kerberos/bin/rsh -f rdist-file
if you have kerberos rsh enabled.
You can also instruct rdist-file to reboot after you successfully
install the files.
On Mar 7, 2007, at 10:37 AM, Mason Schmitt wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Brent L. Bates wrote:
>> I THOUGHT I had taken care of this, now I'm not so sure. I
>> downloaded
>> and installed the lastest tzdata RPM. `zdump -v' on the appropriate
>> /usr/share/zoneinfo file showed the correct information. I copied
>> the
>> zoneinfo file (/usr/share/zoneinfo/America/New_York) to /etc/
>> localtime and
>> thought that should fix everything.
>
> This issue seems to be generating a lot of confusion for everyone
> in IT.
> It was actually a story on the news this morning. We have done our
> update, so I thought I would put together a small how-to.
>
> Here are a few steps that you can follow on all your linux hosts,
> whether they are SL or not (in our case, redhat, mandrake and SL).
> These were the steps that I did on our small network. On a larger
> network, presumably you have other means of running commands across a
> large number of hosts.
>
>
> Note: 'hostlist' contains a list of all linux hosts on the
> network. As
> well, I use ssh keys to log into servers so that I'm not prompted for
> passwords in these little scripts.
>
>
> 1 - Discover which timezone your servers are currently set to
> - -------------------------------------------------------------
> for host in `cat ~/hostlist`; do
> echo $host;
> ssh $host cat /etc/sysconfig/clock;
> done
>
> Your output should look like something like this. As you can see the
> timezone for this computer is "Canada/Pacific"
> <host>
> UTC=true
> ARC=false
> ZONE=Canada/Pacific
>
>
> 2 - Update timezone data on all hosts
> - -----------------------------------
> Each server can be updated by simply copying over know good timezone
> files, symlinking /etc/localtime to the appropriate timezone file and
> rebooting the machine. In our case, I grabbed updated timezone files
> from an SL4.4 box and copied them to all hosts. The files I copied
> were:
> /usr/share/zoneinfo/Canada/Pacific
> and
> /usr/share/zoneinfo/America/Vancouver.
>
> If you have servers in several different timezones, you may want to
> create a tarball with new zone info for all timezones listed in
> /usr/share/zoneinfo/, copy that tarball to all hosts and overwrite the
> old timezone data. Then, based on the output from the script in
> section
> one, you could automate the creation of a symlink from the appropriate
> file in /usr/share/zoneinfo/ to /etc/localtime.
>
>
> 3 - Apply the changes
> - ------------------------
> The easiest way to ensure the changes are applied to all processes
> that
> use the locale settings, is a reboot. However, if you really want
> to be
> sure everything is correct before rebooting, you can confirm the
> changes
> by running a short little script something like this.
>
> for host in `cat ~/hostlist`; do
> echo -n "$host "
> ssh $host "date -d 'March 11 2007 02:30' | awk '{print \$5}'"
> done
>
> Note: I used the date command as it actually uses /etc/localtime and I
> can be much more specific about which time I want to see, than if I
> were
> to use zdump.
>
> This script will spit out the timezone for each server. All our
> servers
> are in the Pacific timezone so I should expect to see PDT if all is
> well. If a change did not apply correctly then I would see PST.
>
> Even if you have servers in multiple timezones, they should all
> indicate
> they are in a daylight savings time timezone rather than a standard
> time
> zone, so greping for 'D' may be sufficient to know whether the
> change is
> correct or not.
>
>
>
> Hopefully this is of use to someone and that no one has any issues
> as a
> result of the changeover this Sunday.
>
> - --
> Mason Schmitt
> Systems Administrator
> Sunwave Cable Internet / Shuswap Internet Junction
> ph: (250) 832-9711
> www.sunwave.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFF7wZfbip6upg8pq8RAnloAKCQrPAazE1Ryjwi38YsZjkphpCN9QCffLmG
> +X+AZ8eoOHiW6d0qxTIzRfA=
> =Id3e
> -----END PGP SIGNATURE-----
|