Subject: | |
From: | |
Reply To: | |
Date: | Fri, 18 Aug 2017 11:56:24 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
> On 8/18/2017 1:46 PM, ToddAndMargo wrote:>> Hi All,
>>
>> Is there a way to create software raid 1 after the fact?
>> Meaning, you already installed SL on a stand alone drive.
>>
>> -T
>
On 08/18/2017 11:44 AM, Betts, Wayne wrote:
> Hello T,
>
> I have successfully used a utility called Raider a couple of times:
> http://raider.sourceforge.net/ It is proof that what you want to do can
> be done. Read the README, which is not terribly long. I don't remember
> the details of the systems used it on, but I recall being impressed at
> the details it handled. Everything it does can be done by hand with
> various core utilities (which is what raider uses anyway) and it isn't
> terribly hard to understand, but Raider handles a lot of the details
> automatically, making the process less error-prone than trying to go
> through everything by hand.
>
> While it is possible to use Raider on a live, fully functioning system
> to minimize downtime (other than a necessary reboot), you can and often
> should run Raider in single-user mode. There is a power down to
> physically swap disks and boot from the new degraded array(s), after
> which the new RAID array(s) begin syncing.
>
> Of course, it is strongly recommended that you first clone the disk (or
> at least make a remote backup of any important files) with a utility you
> trust and are familiar with. (I often use Clonezilla, but there are a
> lot of options for this.)
>
> -Wayne
Thank you!
|
|
|