Hello,
I was running SL6.1 OK but now the display no longer works - On boot
the top half of the display is readable but the bottom half is
rectangles of black and the screen. The mouse won't move into the
lower half of the screen and produces a trail of black behind it. If
I login the menus at the top are accessible but in half the width that
they should be.
I know that the monitor is OK as I use a KVM switch for another
computer - I have also connected the monitor directly to the PC with
no improvement.
I tried booting to run level 3 and used startx, same result - I've
attached the log file.
I also tried Xorg - configure but this doesn't work either, I get the
error "Number of created screens does not match the number of detected
devices. Configuration failed, server terminated with error (2)"- The
file it produces is attached.
I have also tried updating the system to 6.4 in the hope this might
fix it - it doesn't.
Any help gratefully received.
Chris
[ 12985.331]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 12985.366] X Protocol Version 11, Revision 0
[ 12985.377] Build Operating System: sl6 2.6.32-279.el6.x86_64
[ 12985.401] Current Operating System: Linux scilinux 2.6.32-358.2.1.el6.i686 #1 SMP Tue Mar 12 14:17:32 CDT 2013 i686
[ 12985.402] Kernel command line: ro root=/dev/mapper/vg_scilinux-lv_root rd_LVM_LV=vg_scilinux/lv_root rd_LVM_LV=vg_scilinux/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk rhgb quiet 3 vga=ask
[ 12985.452] Build Date: 23 February 2013 11:20:14PM
[ 12985.465] Build ID: xorg-x11-server 1.13.0-11.sl6
[ 12985.478] Current version of pixman: 0.26.2
[ 12985.504] Before reporting problems, check http://www.scientificlinux.org/maillists
to make sure that you have the latest version.
[ 12985.504] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12985.560] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 24 21:48:33 2013
[ 12985.578] (II) Loader magic: 0x826d020
[ 12985.578] (II) Module ABI versions:
[ 12985.578] X.Org ANSI C Emulation: 0.4
[ 12985.578] X.Org Video Driver: 13.1
[ 12985.578] X.Org XInput driver : 18.0
[ 12985.578] X.Org Server Extension : 7.0
[ 12985.580] (--) PCI:*(0:1:0:0) 5333:8d04:1565:1200 rev 0, Mem @ 0xed000000/524288, 0xe0000000/134217728, BIOS @ 0x????????/65536
[ 12985.594] (==) Using default built-in configuration (39 lines)
[ 12985.594] (==) --- Start of built-in configuration ---
[ 12985.594] Section "Device"
[ 12985.594] Identifier "Builtin Default savage Device 0"
[ 12985.594] Driver "savage"
[ 12985.595] EndSection
[ 12985.595] Section "Screen"
[ 12985.595] Identifier "Builtin Default savage Screen 0"
[ 12985.595] Device "Builtin Default savage Device 0"
[ 12985.595] EndSection
[ 12985.595] Section "Device"
[ 12985.595] Identifier "Builtin Default vesa Device 0"
[ 12985.595] Driver "vesa"
[ 12985.595] EndSection
[ 12985.595] Section "Screen"
[ 12985.595] Identifier "Builtin Default vesa Screen 0"
[ 12985.595] Device "Builtin Default vesa Device 0"
[ 12985.595] EndSection
[ 12985.595] Section "Device"
[ 12985.595] Identifier "Builtin Default modesetting Device 0"
[ 12985.595] Driver "modesetting"
[ 12985.595] EndSection
[ 12985.595] Section "Screen"
[ 12985.595] Identifier "Builtin Default modesetting Screen 0"
[ 12985.595] Device "Builtin Default modesetting Device 0"
[ 12985.595] EndSection
[ 12985.595] Section "Device"
[ 12985.595] Identifier "Builtin Default fbdev Device 0"
[ 12985.595] Driver "fbdev"
[ 12985.595] EndSection
[ 12985.595] Section "Screen"
[ 12985.595] Identifier "Builtin Default fbdev Screen 0"
[ 12985.595] Device "Builtin Default fbdev Device 0"
[ 12985.595] EndSection
[ 12985.595] Section "ServerLayout"
[ 12985.595] Identifier "Builtin Default Layout"
[ 12985.595] Screen "Builtin Default savage Screen 0"
[ 12985.595] Screen "Builtin Default vesa Screen 0"
[ 12985.595] Screen "Builtin Default modesetting Screen 0"
[ 12985.595] Screen "Builtin Default fbdev Screen 0"
[ 12985.595] EndSection
[ 12985.595] (==) --- End of built-in configuration ---
[ 12985.595] (==) ServerLayout "Builtin Default Layout"
[ 12985.595] (**) |-->Screen "Builtin Default savage Screen 0" (0)
[ 12985.595] (**) | |-->Monitor "<default monitor>"
[ 12985.595] (**) | |-->Device "Builtin Default savage Device 0"
[ 12985.595] (==) No monitor specified for screen "Builtin Default savage Screen 0".
Using a default monitor configuration.
[ 12985.595] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 12985.595] (**) | |-->Monitor "<default monitor>"
[ 12985.596] (**) | |-->Device "Builtin Default vesa Device 0"
[ 12985.596] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 12985.596] (**) |-->Screen "Builtin Default modesetting Screen 0" (2)
[ 12985.596] (**) | |-->Monitor "<default monitor>"
[ 12985.596] (**) | |-->Device "Builtin Default modesetting Device 0"
[ 12985.596] (==) No monitor specified for screen "Builtin Default modesetting Screen 0".
Using a default monitor configuration.
[ 12985.596] (**) |-->Screen "Builtin Default fbdev Screen 0" (3)
[ 12985.596] (**) | |-->Monitor "<default monitor>"
[ 12985.596] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 12985.596] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 12985.596] (==) Automatically adding devices
[ 12985.596] (==) Automatically enabling devices
[ 12985.596] (==) Not automatically adding GPU devices
[ 12985.596] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 12985.596] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12985.596] (II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
[ 12985.611] Initializing built-in extension Generic Event Extension
[ 12985.625] Initializing built-in extension SHAPE
[ 12985.639] Initializing built-in extension MIT-SHM
[ 12985.652] Initializing built-in extension XInputExtension
[ 12985.665] Initializing built-in extension XTEST
[ 12985.678] Initializing built-in extension BIG-REQUESTS
[ 12985.690] Initializing built-in extension SYNC
[ 12985.702] Initializing built-in extension XKEYBOARD
[ 12985.713] Initializing built-in extension XC-MISC
[ 12985.725] Initializing built-in extension XINERAMA
[ 12985.736] Initializing built-in extension XFIXES
[ 12985.747] Initializing built-in extension RENDER
[ 12985.757] Initializing built-in extension RANDR
[ 12985.767] Initializing built-in extension COMPOSITE
[ 12985.777] Initializing built-in extension DAMAGE
[ 12985.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 12985.796] Initializing built-in extension DOUBLE-BUFFER
[ 12985.806] Initializing built-in extension RECORD
[ 12985.816] Initializing built-in extension DPMS
[ 12985.825] Initializing built-in extension X-Resource
[ 12985.834] Initializing built-in extension XVideo
[ 12985.843] Initializing built-in extension XVideo-MotionCompensation
[ 12985.851] Initializing built-in extension SELinux
[ 12985.859] Initializing built-in extension XFree86-VidModeExtension
[ 12985.866] Initializing built-in extension XFree86-DGA
[ 12985.873] Initializing built-in extension XFree86-DRI
[ 12985.879] Initializing built-in extension DRI2
[ 12985.879] (II) LoadModule: "glx"
[ 12985.880] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12985.881] (II) Module glx: vendor="X.Org Foundation"
[ 12985.881] compiled for 1.13.0, module version = 1.0.0
[ 12985.881] ABI class: X.Org Server Extension, version 7.0
[ 12985.881] (==) AIGLX enabled
[ 12985.887] Loading extension GLX
[ 12985.887] (II) LoadModule: "savage"
[ 12985.888] (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
[ 12985.888] (II) Module savage: vendor="X.Org Foundation"
[ 12985.888] compiled for 1.13.0, module version = 2.3.6
[ 12985.888] Module class: X.Org Video Driver
[ 12985.888] ABI class: X.Org Video Driver, version 13.1
[ 12985.888] (II) LoadModule: "vesa"
[ 12985.888] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12985.888] (II) Module vesa: vendor="X.Org Foundation"
[ 12985.888] compiled for 1.13.0, module version = 2.3.2
[ 12985.888] Module class: X.Org Video Driver
[ 12985.888] ABI class: X.Org Video Driver, version 13.1
[ 12985.888] (II) LoadModule: "modesetting"
[ 12985.888] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 12985.888] (II) Module modesetting: vendor="X.Org Foundation"
[ 12985.889] compiled for 1.13.0, module version = 0.5.0
[ 12985.889] Module class: X.Org Video Driver
[ 12985.889] ABI class: X.Org Video Driver, version 13.1
[ 12985.889] (II) LoadModule: "fbdev"
[ 12985.889] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 12985.889] (II) Module fbdev: vendor="X.Org Foundation"
[ 12985.889] compiled for 1.13.0, module version = 0.4.3
[ 12985.889] Module class: X.Org Video Driver
[ 12985.889] ABI class: X.Org Video Driver, version 13.1
[ 12985.889] (II) SAVAGE: driver (version 2.3.6) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
[ 12985.889] (II) VESA: driver for VESA chipsets: vesa
[ 12985.889] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12985.889] (II) FBDEV: driver for framebuffer: fbdev
[ 12985.890] (--) using VT number 7
[ 12985.947] (WW) Falling back to old probe method for vesa
[ 12985.947] (WW) Falling back to old probe method for modesetting
[ 12985.948] (EE) open /dev/dri/card0: No such file or directory
[ 12985.948] (WW) Falling back to old probe method for fbdev
[ 12985.948] (II) Loading sub module "fbdevhw"
[ 12985.948] (II) LoadModule: "fbdevhw"
[ 12985.948] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12985.948] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12985.948] compiled for 1.13.0, module version = 0.0.2
[ 12985.948] ABI class: X.Org Video Driver, version 13.1
[ 12985.948] (II) Loading sub module "vgahw"
[ 12985.948] (II) LoadModule: "vgahw"
[ 12985.951] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 12985.951] (II) Module vgahw: vendor="X.Org Foundation"
[ 12985.951] compiled for 1.13.0, module version = 0.1.0
[ 12985.951] ABI class: X.Org Video Driver, version 13.1
[ 12985.951] (II) SAVAGE(0): Creating default Display subsection in Screen section
"Builtin Default savage Screen 0" for depth/fbbpp 24/32
[ 12985.951] (==) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
[ 12985.951] (==) SAVAGE(0): RGB weight 888
[ 12985.951] (==) SAVAGE(0): Default visual is TrueColor
[ 12985.953] (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 12985.953] (==) SAVAGE(0): Using XAA acceleration architecture
[ 12985.953] (==) SAVAGE(0): Using HW cursor
[ 12985.953] (==) SAVAGE(0): Using video BIOS to set modes
[ 12985.953] (II) Loading sub module "vbe"
[ 12985.953] (II) LoadModule: "vbe"
[ 12985.953] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 12985.954] (II) Module vbe: vendor="X.Org Foundation"
[ 12985.954] compiled for 1.13.0, module version = 1.1.0
[ 12985.954] ABI class: X.Org Video Driver, version 13.1
[ 12985.954] (II) Loading sub module "int10"
[ 12985.954] (II) LoadModule: "int10"
[ 12985.954] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 12985.954] (II) Module int10: vendor="X.Org Foundation"
[ 12985.954] compiled for 1.13.0, module version = 1.0.0
[ 12985.954] ABI class: X.Org Video Driver, version 13.1
[ 12985.954] (II) SAVAGE(0): initializing int10
[ 12985.999] (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
[ 12985.999] (II) SAVAGE(0): VESA BIOS detected
[ 12986.000] (II) SAVAGE(0): VESA VBE Version 3.0
[ 12986.000] (II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
[ 12986.000] (II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
[ 12986.000] (II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
[ 12986.000] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
[ 12986.000] (II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
[ 12986.000] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
[ 12986.000] (--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
[ 12986.000] (--) SAVAGE(0): Engine: "ProSavageDDR"
[ 12986.000] (--) SAVAGE(0): AGP card detected
[ 12986.000] (==) SAVAGE(0): Using AGP DMA
[ 12986.000] (==) SAVAGE(0): Will try command and vertex DMA mode
[ 12986.000] (==) SAVAGE(0): Using AGP 1x mode
[ 12986.000] (==) SAVAGE(0): Using 16 MB AGP aperture
[ 12986.070] (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12986.070] (--) SAVAGE(0): probed videoram: 32768k
[ 12986.091] (II) Loading sub module "ddc"
[ 12986.091] (II) LoadModule: "ddc"
[ 12986.091] (II) Module "ddc" already built-in
[ 12987.035] (--) SAVAGE(0): No DDC signal
[ 12987.035] (II) Loading sub module "i2c"
[ 12987.035] (II) LoadModule: "i2c"
[ 12987.035] (II) Module "i2c" already built-in
[ 12987.036] (II) SAVAGE(0): I2C bus "I2C bus" initialized.
[ 12987.036] (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
[ 12987.039] (--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
[ 12987.039] (--) SAVAGE(0): 2048x259 TFT LCD panel detected but not active
[ 12987.047] (--) SAVAGE(0): Found 5 modes at this depth:
[ 12987.047] [112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[ 12987.048] [115] 800 x 600, 60Hz, 75Hz, 85Hz
[ 12987.048] [118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[ 12987.048] [11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[ 12987.048] [124] 1600 x 1200, 60Hz
[ 12987.048] (II) SAVAGE(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 12987.048] (II) SAVAGE(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 12987.048] (II) SAVAGE(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 12987.048] (WW) SAVAGE(0): Unable to estimate virtual size
[ 12987.048] (II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
[ 12987.048] (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
[ 12987.048] (--) SAVAGE(0): No suitable BIOS mode found for 640x400 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "640x400" (no mode of this name)
[ 12987.048] (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
[ 12987.048] (--) SAVAGE(0): Chose mode 112 at 60Hz.
[ 12987.048] (--) SAVAGE(0): Chose mode 112 at 75Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 112 at 75Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 112 at 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 75Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 75Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 115 at 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[ 12987.048] (--) SAVAGE(0): No suitable BIOS mode found for 848x480 60Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "848x480" (no mode of this name)
[ 12987.048] (--) SAVAGE(0): Chose mode 118 at 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[ 12987.048] (--) SAVAGE(0): Chose mode 118 at 70Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 118 at 75Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[ 12987.048] (--) SAVAGE(0): Chose mode 118 at 85Hz.
[ 12987.048] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): Chose mode 118 at 130Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1152x864 75Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 74Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 84Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 119Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 74Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 84Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 119Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x960 60Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x960 85Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1280x960 119Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): Chose mode 11b at 60Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): Chose mode 11b at 75Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): Chose mode 11b at 85Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): Chose mode 11b at 100Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1360x768 60Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1360x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1360x768 119Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1360x768" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 74Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 84Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 119Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 59Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 74Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
[ 12987.049] (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 84Hz.
[ 12987.049] (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 119Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): Chose mode 124 at 60Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
[ 12987.050] (--) SAVAGE(0): Chose mode 124 at 60Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
[ 12987.050] (--) SAVAGE(0): Chose mode 124 at 60Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
[ 12987.050] (--) SAVAGE(0): Chose mode 124 at 60Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 74Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 84Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1792x1344 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1792x1344" (no mode of this name)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1856x1392 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1856x1392" (no mode of this name)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name)
[ 12987.050] (--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 59Hz.
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 12987.050] (II) SAVAGE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
[ 12987.050] (II) SAVAGE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
[ 12987.050] (II) SAVAGE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
[ 12987.050] (II) SAVAGE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
[ 12987.050] (II) SAVAGE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
[ 12987.050] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[ 12987.050] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[ 12987.050] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[ 12987.050] (--) SAVAGE(0): Chose mode 112 at 60Hz.
[ 12987.050] (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
[ 12987.050] (**) SAVAGE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 12987.050] (II) SAVAGE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 12987.050] (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 12987.050] (II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 12987.050] (**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 12987.050] (II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 12987.051] (**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 12987.051] (II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 12987.051] (==) SAVAGE(0): DPI set to (96, 96)
[ 12987.051] (II) Loading sub module "fb"
[ 12987.051] (II) LoadModule: "fb"
[ 12987.051] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12987.052] (II) Module fb: vendor="X.Org Foundation"
[ 12987.052] compiled for 1.13.0, module version = 1.0.0
[ 12987.052] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12987.052] (II) Loading sub module "xaa"
[ 12987.052] (II) LoadModule: "xaa"
[ 12987.053] (WW) Warning, couldn't open module xaa
[ 12987.053] (II) UnloadModule: "xaa"
[ 12987.053] (II) Unloading xaa
[ 12987.053] (EE) SAVAGE: Failed to load module "xaa" (module does not exist, 0)
[ 12987.053] (II) SAVAGE(0): Falling back to shadowfb
[ 12987.053] (II) Loading sub module "ramdac"
[ 12987.053] (II) LoadModule: "ramdac"
[ 12987.053] (II) Module "ramdac" already built-in
[ 12987.053] (II) Loading sub module "shadowfb"
[ 12987.053] (II) LoadModule: "shadowfb"
[ 12987.053] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 12987.053] (II) Module shadowfb: vendor="X.Org Foundation"
[ 12987.053] compiled for 1.13.0, module version = 1.0.0
[ 12987.054] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12987.054] (II) UnloadModule: "vesa"
[ 12987.054] (II) Unloading vesa
[ 12987.054] (II) UnloadModule: "modesetting"
[ 12987.054] (II) Unloading modesetting
[ 12987.054] (II) UnloadModule: "fbdev"
[ 12987.054] (II) Unloading fbdev
[ 12987.054] (II) UnloadSubModule: "fbdevhw"
[ 12987.054] (II) Unloading fbdevhw
[ 12987.054] (--) Depth 24 pixmap format is 32 bpp
[ 12987.054] (II) Loading sub module "int10"
[ 12987.054] (II) LoadModule: "int10"
[ 12987.055] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 12987.055] (II) Module int10: vendor="X.Org Foundation"
[ 12987.055] compiled for 1.13.0, module version = 1.0.0
[ 12987.055] ABI class: X.Org Video Driver, version 13.1
[ 12987.055] (II) SAVAGE(0): initializing int10
[ 12987.056] (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
[ 12987.056] (II) SAVAGE(0): VESA BIOS detected
[ 12987.056] (II) SAVAGE(0): VESA VBE Version 3.0
[ 12987.056] (II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
[ 12987.056] (II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
[ 12987.056] (II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
[ 12987.056] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
[ 12987.056] (II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
[ 12987.056] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
[ 12987.063] (EE) SAVAGE(0): DRI isn't enabled
[ 12987.063] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[ 12987.203] (==) SAVAGE(0): Backing store disabled
[ 12987.203] (==) SAVAGE(0): DPMS enabled
[ 12987.203] (WW) SAVAGE(0): Direct rendering disabled
[ 12987.204] (==) RandR enabled
[ 12987.220] (II) SELinux: Disabled by boolean
[ 12987.222] (II) AIGLX: Screen 0 is not DRI2 capable
[ 12987.222] (II) AIGLX: Screen 0 is not DRI capable
[ 12987.230] (II) AIGLX: Loaded and initialized swrast
[ 12987.230] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 12987.443] (II) config/hal: Adding input device AT Translated Set 2 keyboard
[ 12987.443] (II) LoadModule: "evdev"
[ 12987.443] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12987.445] (II) Module evdev: vendor="X.Org Foundation"
[ 12987.445] compiled for 1.13.0, module version = 2.7.3
[ 12987.445] Module class: X.Org XInput Driver
[ 12987.445] ABI class: X.Org XInput driver, version 18.0
[ 12987.445] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12987.445] (**) AT Translated Set 2 keyboard: always reports core events
[ 12987.445] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 12987.446] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12987.446] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12987.446] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12987.446] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input"
[ 12987.446] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6)
[ 12987.446] (**) Option "xkb_rules" "evdev"
[ 12987.446] (**) Option "xkb_model" "pc105"
[ 12987.446] (**) Option "xkb_layout" "gb"
[ 12987.446] (WW) Option "xkb_variant" requires an string value
[ 12987.446] (WW) Option "XkbVariant" requires an string value
[ 12987.446] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12987.537] (II) config/hal: Adding input device Sleep Button
[ 12987.537] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12987.537] (**) Sleep Button: always reports core events
[ 12987.537] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12987.538] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12987.538] (--) evdev: Sleep Button: Found keys
[ 12987.538] (II) evdev: Sleep Button: Configuring as keyboard
[ 12987.538] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_1"
[ 12987.538] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 12987.538] (**) Option "xkb_rules" "evdev"
[ 12987.538] (**) Option "xkb_model" "pc105"
[ 12987.538] (**) Option "xkb_layout" "gb"
[ 12987.538] (WW) Option "xkb_variant" requires an string value
[ 12987.538] (WW) Option "XkbVariant" requires an string value
[ 12987.538] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12987.550] (II) config/hal: Adding input device Power Button
[ 12987.551] (II) Using input driver 'evdev' for 'Power Button'
[ 12987.551] (**) Power Button: always reports core events
[ 12987.551] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 12987.551] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12987.551] (--) evdev: Power Button: Found keys
[ 12987.551] (II) evdev: Power Button: Configuring as keyboard
[ 12987.551] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_0"
[ 12987.551] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 12987.551] (**) Option "xkb_rules" "evdev"
[ 12987.551] (**) Option "xkb_model" "pc105"
[ 12987.551] (**) Option "xkb_layout" "gb"
[ 12987.551] (WW) Option "xkb_variant" requires an string value
[ 12987.551] (WW) Option "XkbVariant" requires an string value
[ 12987.551] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12987.564] (II) config/hal: Adding input device Power Button
[ 12987.564] (II) Using input driver 'evdev' for 'Power Button'
[ 12987.564] (**) Power Button: always reports core events
[ 12987.564] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12987.564] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12987.564] (--) evdev: Power Button: Found keys
[ 12987.564] (II) evdev: Power Button: Configuring as keyboard
[ 12987.564] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input"
[ 12987.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 12987.564] (**) Option "xkb_rules" "evdev"
[ 12987.564] (**) Option "xkb_model" "pc105"
[ 12987.564] (**) Option "xkb_layout" "gb"
[ 12987.564] (WW) Option "xkb_variant" requires an string value
[ 12987.564] (WW) Option "XkbVariant" requires an string value
[ 12987.564] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12987.574] (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
[ 12987.574] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 12987.574] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 12987.574] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 12987.574] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 12987.574] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 12987.574] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 12987.574] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 12987.574] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 12987.574] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 12987.574] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 12987.574] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 12987.574] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12987.575] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input"
[ 12987.575] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 12987.575] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 12987.575] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 12987.575] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 12987.575] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 12987.575] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 12987.584] (II) config/hal: Adding input device Macintosh mouse button emulation
[ 12987.585] (II) Using input driver 'evdev' for 'Macintosh mouse button emulation'
[ 12987.585] (**) Macintosh mouse button emulation: always reports core events
[ 12987.585] (**) evdev: Macintosh mouse button emulation: Device: "/dev/input/event3"
[ 12987.585] (--) evdev: Macintosh mouse button emulation: Vendor 0x1 Product 0x1
[ 12987.585] (--) evdev: Macintosh mouse button emulation: Found 3 mouse buttons
[ 12987.585] (--) evdev: Macintosh mouse button emulation: Found relative axes
[ 12987.585] (--) evdev: Macintosh mouse button emulation: Found x and y relative axes
[ 12987.585] (II) evdev: Macintosh mouse button emulation: Configuring as mouse
[ 12987.585] (**) evdev: Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 12987.585] (**) evdev: Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12987.585] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_2"
[ 12987.585] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE, id 11)
[ 12987.585] (II) evdev: Macintosh mouse button emulation: initialized for relative axes.
[ 12987.585] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 12987.585] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[ 12987.585] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 12987.585] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 13039.958] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[ 13244.865] (II) evdev: Macintosh mouse button emulation: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13244.865] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13244.865] (II) evdev: Power Button: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13244.865] (II) evdev: Power Button: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13244.865] (II) evdev: Sleep Button: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13244.865] (II) evdev: AT Translated Set 2 keyboard: Close
[ 13244.865] (II) UnloadModule: "evdev"
[ 13245.110] Server terminated successfully (0). Closing log file.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
#Option "ForceInit" # [<bool>]
#Option "DisableXVMC" # [<bool>]
#Option "DisableTile" # [<bool>]
#Option "DisableCOB" # [<bool>]
#Option "BCIforXv" # [<bool>]
#Option "DVI" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "BusType" # [<str>]
#Option "DmaType" # [<str>]
#Option "DmaMode" # [<str>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DRI" # [<bool>]
#Option "AGPforXv" # [<bool>]
Identifier "Card0"
Driver "savage"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "kmsdev" # <str>
#Option "ShadowFB" # [<bool>]
Identifier "Card1"
Driver "modesetting"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # <str>
#Option "fbdev" # <str>
#Option "debug" # [<bool>]
Identifier "Card2"
Driver "fbdev"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card3"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Card3"
Monitor "Monitor3"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
