P.S. the route command is a legacy command from the 2.2 kernel days
and should not be used any more.

On Wed, Dec 4, 2013 at 3:20 PM, Paul Robert Marino <[log in to unmask]> wrote:
> ip route delete default via xxx.xxx.xxx.xxx dev eth0
> then
> ip route add default via yyy.yyy.yyy.yyy dev eth0
>
> replace xxx.xxx.xxx.xxx with your current router and yyy.yyy.yyy.yyy
> with the new one
>
> there is also an "ip route replace " syntax as well if you need it
> see "man ip" for more details ;-)
>
>
> On Wed, Dec 4, 2013 at 2:41 PM, ToddAndMargo <[log in to unmask]> wrote:
>> Hi All,
>>
>> SL 6.5, 64 bit.
>>
>> I had to manually configure a Tread Net TEW-638PAP as a wireless
>> bridge yesterday.  In the process, I had to change my default
>> router (a.k.a. gateway) three times.  (Networking too, but
>> that worked.) The TEW-638PAP was hooked to my second
>> Ethernet port (eth1).
>>
>> Problem, I had to reboot to get the new default route to
>> stick.
>>
>> Now I know of two places I can put my default router:
>>
>>    /etc/sysconfig/network     <--- where I put it
>>    GATEWAY=192.168.10.100   and
>>
>>    /etc/sysconfig/network-scripts/ifcfg-eth1
>>    GATEWAY=192.168.10.100
>>
>> I am using /etc/sysconfig/network and the "vi" method.
>>
>> To check my default router setting, I used "netstat -rn"
>> and looked for the tags "UG".  (It is at the bottom of
>> the list.)
>>
>> To try to get the new default router setting to take,
>> I used:
>>
>>     service network restart; netstat -rn
>> and
>>     ifdown eth1; ifup eth1; netstat -rn
>>
>> No joy with either method.  Whatever gateway I had when
>> I booted, was the one I was stuck with.  Reboot
>> was the only way to make the change.  I even tried
>> manually configuring it with "route".  No joy there
>> either.  :'(
>>
>> What did I do wrong?
>>
>> Many thanks,
>> -T
>>
>>
>> --
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Computers are like air conditioners.
>> They malfunction when you open windows
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~