SCIENTIFIC-LINUX-USERS Archives

April 2014

SCIENTIFIC-LINUX-USERS@LISTSERV.FNAL.GOV

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Boryeu Mao <[log in to unmask]>
Reply To:
Boryeu Mao <[log in to unmask]>
Date:
Wed, 2 Apr 2014 20:00:58 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (80 lines)
Glad to know it worked for you.

On 4/2/14, Yogi A. Patel <[log in to unmask]> wrote:
> Thanks - that worked!
>
> --
> Yogi A. Patel
> (c): (828) 291-6715
> (url): www.yapatel.org | @yapatel525
>
> On Apr 2, 2014, at 10:27 PM, Boryeu Mao <[log in to unmask]> wrote:
>
>> Although not a direct response to the reported failed dependencies
>> during rpm install, perhaps this could be an alternative route to
>> consider for the fglrx driver installation.
>>
>> For Radeon HD 7520 (in AMD A6-4400) I followed AMD's support site
>> (before I became aware of the community wiki at www.cchtml.com for
>> SL):
>>
>> http://support.amd.com/en-us/kb-articles/Pages/amdcatalyst13-12linreleasenotes.aspx
>>
>> and successfully installed fglrx driver in SL6.5 (stock kernel
>> 2.6.32-431.1.2.el6.x86_64, later 431.11.2).  This is a fairly new AMD
>> release (13-12), and I did the installation without building an
>> intermediate rpm (no need for me).  The only minor change I needed was
>> to re-make the symlink /lib/modules/${KERNEL_version}/build to point
>> to the kernel source directory with a trailing / - the AMD installer
>> seems to be rather particular about that.
>>
>> Hope this helps.
>>
>>
>> On 4/2/14, Patel, Yogi A <[log in to unmask]> wrote:
>>> Hi -
>>>
>>> I have a fully functionling SL6 install with Xenomai and Linux kernel
>>> 3.8.13.
>>>
>>> I am trying to install the appropriate graphics drivers (Radeon HD 8490)
>>> but
>>> am running into an issue I can't figure out.
>>>
>>> I am following the directions listed here:
>>> http://wiki.cchtml.com/index.php/Scientific_Linux#Scientific_Linux_6x
>>>
>>> When I run "sudo rpm -Uvh fglrx64_p_i_c-13.35.1005-1.x86_64.rpm ", I get
>>> the
>>> following:
>>>
>>> [yapatel@poseidon fglrx-13.35.1005]$ sudo rpm -Uvh
>>> fglrx64_p_i_c-13.35.1005-1.x86_64.rpm
>>> error: Failed dependencies:
>>> 	libstdc++.so.6 is needed by fglrx64_p_i_c-13.35.1005-1.x86_64
>>> 	libstdc++.so.6(CXXABI_1.3) is needed by
>>> fglrx64_p_i_c-13.35.1005-1.x86_64
>>> 	libstdc++.so.6(GLIBCXX_3.4) is needed by
>>> fglrx64_p_i_c-13.35.1005-1.x86_64
>>>
>>> I checked and there is a file called libstdc++.so.6 in /usr/lib64.
>>>
>>> I ran strings /usr/lib64/libstdc++.so.6 | grep CXXABI and see version 1.3
>>> in
>>> the list.
>>>
>>> I ran strings /usr/lib64/libstdc++.so.6 | grep GLIBCXX and see version
>>> 3.4
>>> in the list.
>>>
>>> I thought it was because I had recompiled inappropriately so I
>>> recompiled
>>> the .rpm but that didn't work either.
>>>
>>> Any advice/help is appreciated.
>>>
>>> Yogi
>>>
>
>

ATOM RSS1 RSS2