Subject: | |
From: | |
Reply To: | |
Date: | Mon, 22 Aug 2011 18:04:39 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
2011/8/22 Akemi Yagi <[log in to unmask]>:
> On Mon, Aug 22, 2011 at 7:42 AM, Eero Volotinen <[log in to unmask]> wrote:
>> 2011/8/22 Devin Bougie <[log in to unmask]>:
>>> Hi Eero,
>>>
>>> Have you tried using the e1000e driver that's provided by SL? We haven't had any problems using 82572EI cards in SL5.6 with the e1000e driver.
>>>
>>> I hope this helps,
>>> Devin
>>
>> You mean the default driver? yes, it cannot detect line.
>
> As Patrick mentioned, ELRepo's kmod-e1000e package may be worth a try
> because its driver version is newer:
>
> EL5: 1.3.10-k2
> EL6: 1.2.20-k2
> ELRepo: 1.4.4
>
> If that does not make any difference and you want to remove it, it's
> as easy as running 'rpm -e kmod-e1000e'.
>
> Akemi
>
No effect, card is still dead, no link indicator:
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000001 (1)
Link detected: no
--
Eero
|
|
|