Hi
Michael Mansour wrote:
> Hi,
>
> I'm kickstarting some proliant dl360's, and as their got 2 embedded nics, each
> time they kickstart the process asks which ethernet card to kickstart from,
> eth0 or eth1.
>
> In my kickstart file I define:
>
> network --device eth0
>
> and have tried this both with the "--bootproto dhcp" line and with assigning
> IP address lines, both methods ask which ethernet card to use.
>
> I'm kickstarting SL42 machines.
>
> Does anyone know how I tell kickstart to always use eth0?
Try adding ksdevice=XXX to your bootup kernel command line, ie:
linux ks ksdevice=eth0
(or ksdevice=link if only one of NICs is cabled)
Cheers
Jarek
__
-------------------------------------------------------
_ Jaroslaw_Polok ___________________ CERN - IT/FIO/LA _
_ http://home.cern.ch/~jpolok ___ tel_+41_22_767_1834 _
_____________________________________ +41_78_792_0795 _