Subject: | |
From: | |
Reply To: | |
Date: | Fri, 15 Oct 2010 16:02:07 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Don't you fix the initial problem with a 'rescue' image? Seem to recall
doing this several times before on a variety on version of
RedHat/Fedora/Scientific Linux. Or am I misunderstanding?
Martin.
--
Martin Bly
RAL Tier1 Fabric Manager
> -----Original Message-----
> From: [log in to unmask]
[mailto:owner-scientific-
> [log in to unmask]] On Behalf Of Larry Linder
> Sent: Friday, October 15, 2010 1:51 PM
> To: [log in to unmask]
> Subject: Replacing Hard Disks with a logical disk names.
>
> A simple problem that I had done for years, turned out to be
difficult due to
> a mistake I made and what I believe is an error in the Linux OS.
> How you set it up is to forget to remove the logical drive from
"/etc/fstab"
> in the past it was never a problem.
> But in SL 5.5 it is a serious problem because during boot it can't
find the
> drive name. It drops you to a maintenance level and all you used to
do in
> put in the root pass word, edit the files etc.
> What happen now:
> put in your password
> "bash /usr/bin/id: no such file or dir"
> "bash [: =: unary operator expected"
> "bash /usr/bin/id:"
> "bash [: =: unary operator expected"
> "bash /usr/bin/kpg-config: no such file or dir"
> >repair file system1
> As a result you can do nothing because your passwd has been rejected.
>
> You are back to using your install disks. It recognizes un initialized
disks
> and initializes them - do a new install and set up disks and disk
names and
> do not format anything, except new disk, setup root / passwd, set up
> internet, do not install any thing. and it knows there is an active
OS
> present and the install aborts.
>
> The system reboots and runs normally everthing is preserved all
because some
> security nit modified the code and never checked the end result.
> Sometime you can be so secure that the system becomes worthless.
>
> What used to be a simple thing of replacing disks has now been
difficult at
> best.
> What I fixed is to get rid of the logical names in in the fstab and
went back
> to the /dev/sda1 etc. This was done because I didn't have a good way
to
> look at disks and their names but knew the hardware.
>
> For back up on paper you need to do "df" and pipe it to lpr, keep in
you file
> folder as a true back up.
>
> You can easily create this problem by simply unplugging a disk and
trying a
> reboot.
>
> I have three backups but I never had a disk that was good but the
electronics
> became intermittent as a function of temperature. suspect a bad
solder joint
> or circuit trace crack somewhere. The symptom was a nice running
drive that
> was sluggish. A reboot solved the problem but the failures began to
> increase. Users don't seem to understand a system being down.
> Some of these boxes are shut down ever six months for cleaning.
>
> Disks being cheep it time to install a new one and toss the old one.
>
> Larry Linder
--
Scanned by iCritical.
|
|
|