Perhaps it is the '.',

The attached kickstart works for me as expected.

Pat

On 03/16/2012 10:05 AM, Branden Timm wrote:
> I used the following kickstart with SL 6.2 x86_64 to produce the 
> behavior, and I just noticed that there was a typo in the firewall 
> directive.  Ports 22 and 442 are separated by a period, not a comma.  
> Could it be that the period caused parsing issues but didn't report an 
> error?
>
> install
> cdrom
> lang en_US.UTF-8
> keyboard us
>
> rootpw  --iscrypted<sanitized>
>
> firewall --enabled --port=22.443,5222
> authconfig --enableshadow --passalgo=sha512
> selinux --disabled
>
> timezone --utc America/Chicago
>
> bootloader --location=mbr --driveorder=sda --append="crashkernel=auto 
> rhgb quiet"
>
> network --bootproto=static --ip=<sanitized --netmask=255.255.255.192 
> --gateway=<sanitized>  --nameserver=<sanitized>  
> --hostname=<sanitized>  --onboot=yes
> clearpart --all --initlabel
>
> part /boot --fstype=ext4 --size=500
>
> part pv.01 --grow --size=1
>
> volgroup vg_base --pesize=4096 pv.01
> logvol swap --name=lv_swap --vgname=vg_base --size=2048
> logvol /tmp --fstype=ext4 --name=lv_tmp --vgname=vg_base --size 8096
> logvol /var/log --fstype=ext4 --name=lv_log --vgname=vg_base --size 4096
> logvol / --fstype=ext4 --name=lv_root --vgname=vg_base --size 10240 
> --grow
> repo --name="Scientific Linux"  --baseurl=file:///mnt/source --cost=100
>
> %packages
> @base
> @core
> @perl-runtime
> @scalable-file-systems
> perl-DBD-SQLite
> -vconfig
> -sos
> -wireless-tools
> -system-config-network-tui
> -dmraid
> -tcsh
> -cpuspeed
> -cryptsetup-luks
> -systemtap-runtime
> -fprintd-pam
> irqbalance
> -dosfstools
> -smartmontools
> -rfkill
> -system-config-firewall-tui
> -pm-utils
> -bridge-utils
> -sl-release-notes
> -tcpdump
> -pcmciautils
> -hunspell
> -b43-fwcutter
> -aic94xx-firmware
> -atmel-firmware
> -bfa-firmware
> -ipw2100-firmware
> -ipw2200-firmware
> -ivtv-firmware
> -iwl1000-firmware
> -iwl3945-firmware
> -iwl4965-firmware
> -iwl5000-firmware
> -iwl5150-firmware
> -iwl6000-firmware
> -iwl6050-firmware
> -kernel-firmware
> -libertas-usb8388-firmware
> -ql2100-firmware
> -ql2200-firmware
> -ql23xx-firmware
> -ql2400-firmware
> -ql2500-firmware
> -rt61pci-firmware
> -rt73usb-firmware
> -xorg-x11-drv-ati-firmware
> -zd1211-firmware
> #------------------------------------------------------------------------------ 
>
>
> %post
> yum -y install yum-conf-epel
> yum -y update
> %end
>
> I confirmed that /root/anaconda-ks.cfg also contained "selinux 
> --disabled".
>
> -- 
> Branden Timm
> [log in to unmask]
>
> On 3/15/2012 11:24 AM, Pat Riehecky wrote:
>> On 03/15/2012 10:49 AM, Branden Timm wrote:
>>> Greetings,
>>>   I want to report a possible bug that I've noticed in the past few 
>>> days.  It seems the "selinux" kickstart option is not honored by 
>>> anaconda in SL 6.2.  My kickstart file contains:
>>>
>>> selinux --disabled
>>>
>>> Yet after install, I notice that /etc/sysconfig/selinux still contains:
>>>
>>> SELINUX=enforcing
>>>
>>> I searched the list archives and didn't see this reported before.
>>>
>>> -- 
>>> Branden Timm
>>> [log in to unmask]
>>
>> I'm unable to replicate this behavior.  Tested SL6.2 i386 with the 
>> following kickstart file:
>>
>> install
>> cdrom
>>
>> rootpw password
>>
>> lang en_US.UTF-8
>> keyboard us
>> network --onboot yes --device eth0 --bootproto dhcp --noipv6
>> firewall --disabled
>> selinux --disabled
>> authconfig --enableshadow --passalgo=sha512
>> timezone --utc America/Chicago
>> reboot
>>
>> bootloader --location=mbr --driveorder=vda
>>
>> part / --fstype=ext4 --onpart=vda1
>> part swap --onpart=vda2
>>
>> %packages
>> @core
>> @base
>> @misc-sl
>> redhat-lsb
>> SL_password_for_singleuser
>>
>>
>> Pat
>>
>>


-- 
Pat Riehecky
Scientific Linux Developer




install
cdrom
lang en_US.UTF-8
keyboard us

rootpw  password

firewall --enabled --port=22,443,5222
authconfig --enableshadow --passalgo=sha512
selinux --disabled

timezone --utc America/Chicago

bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet"

network --onboot yes --device eth0 --bootproto dhcp --noipv6

clearpart --all --initlabel

part /boot --fstype=ext4 --size=500

part pv.01 --grow --size=1

volgroup vg_base --pesize=4096 pv.01
logvol swap --name=lv_swap --vgname=vg_base --size=2048
logvol /tmp --fstype=ext4 --name=lv_tmp --vgname=vg_base --size 8096
logvol /var/log --fstype=ext4 --name=lv_log --vgname=vg_base --size 4096
logvol / --fstype=ext4 --name=lv_root --vgname=vg_base --size 10240 --grow


%packages
@base
@core
@perl-runtime
@scalable-file-systems
perl-DBD-SQLite
-vconfig
-sos
-wireless-tools
-system-config-network-tui
-dmraid
-tcsh
-cpuspeed
-cryptsetup-luks
-systemtap-runtime
-fprintd-pam
irqbalance
-dosfstools
-smartmontools
-rfkill
-system-config-firewall-tui
-pm-utils
-bridge-utils
-sl-release-notes
-tcpdump
-pcmciautils
-hunspell
-b43-fwcutter
-aic94xx-firmware
-atmel-firmware
-bfa-firmware
-ipw2100-firmware
-ipw2200-firmware
-ivtv-firmware
-iwl1000-firmware
-iwl3945-firmware
-iwl4965-firmware
-iwl5000-firmware
-iwl5150-firmware
-iwl6000-firmware
-iwl6050-firmware
-kernel-firmware
-libertas-usb8388-firmware
-ql2100-firmware
-ql2200-firmware
-ql23xx-firmware
-ql2400-firmware
-ql2500-firmware
-rt61pci-firmware
-rt73usb-firmware
-xorg-x11-drv-ati-firmware
-zd1211-firmware
#------------------------------------------------------------------------------

%post
yum -y install yum-conf-epel
yum -y update
%end